LOADING...
Skip to toolbar

Liked Forum Posts

RE: Repair fret slot cutted in wrong position

Or: cut the next slot where it should be then remove wood between the slots with a router to the depth of the slots and patch the gap with a piece of ebony and epoxy and sand the patch to the shape of...

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
RE: Crack in my acoustic back material....

Thanks guys. This has been extremely helpful. I will be trying the epoxy. I might look at it tonight. I'll let ya's know how I make out. ps.... these forms are awesome. I really appreciate the advice...

In forum Acoustic

5 years ago
RE: Crack in my acoustic back material....

@bpower You may have seen me use this when I make those Barncaster guitars but the principle is the same for what you need. The Barncasters are intentionally left a little rough looking but I fill any...

In forum Acoustic

5 years ago
RE: Crack in my acoustic back material....

Looks perfect. It is always worth checking with the manufacturer though, that a product such as this can be used as a structural adhesive as it may have been primarily engineered with a different set ...

In forum Acoustic

5 years ago
RE: Crack in my acoustic back material....

@darrenking I use this stuff to get some great results. Attachment : 43A8A337-A919-4C82-80D4-2120CD7F595F.png

In forum Acoustic

5 years ago
RE: Crack in my acoustic back material....

Hi @boo I seem to remember the original Araldite as being a fairly viscous creamy/yellow colour and this might suggest that it is/was an acrylic based product. They do loads of branded adhesives now s...

In forum Acoustic

5 years ago
RE: Crack in my acoustic back material....

@darrenking Would that be an epoxy glue or (like @bpower is suggesting here) an epoxy resin? What is the difference? I know my dad used to use good old Araldite to fix a myriad of broken items. I see...

In forum Acoustic

5 years ago
RE: Fretboard nearly finished-sanded open an internal crack!

A straight longitudinal crack in a dark, stripy wood is going to be VERY difficult to spot afterwards if you follow the advice already given, and it will have very little, if any, effect on the overal...

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
RE: Repair fret slot cutted in wrong position

Posted by: @wolframmalukker Cut the fingerboard all the way through the misplaced slot, lay it on a sheet of wax paper, and glue the two halves together, then proceed as it were a single piece. I am...

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
RE: Repair fret slot cutted in wrong position

Posted by: @mario Do you recommend me a way to "recycle" the first fretboard. When something similar happened to me I used the damaged fretboard to repair the mistakes I made in the next one! ǹ...

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
RE: Crack in my acoustic back material....

Thanks for the feedback @darrenking and @rocknroller912. Darren.... I really.... really want to use it with the stripes in the middle. I'm very glad you mentioned about the epoxy. I really did have mo...

In forum Acoustic

5 years ago
RE: Crack in my acoustic back material....

@bpower Good advice from @darrenking I would follow it

In forum Acoustic

5 years ago
RE: Repair fret slot cutted in wrong position

I see two options. Cut a filler strip from the end of the fretboard that's the right width to fit the slot, (it'll be fragile as heck) and glue it in. Cut the fingerboard all the way through the mispl...

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
RE: Repair fret slot cutted in wrong position

Posted by: @mario In the case I buy a new fretboard. Do you recommend me a way to "recycle" the first fretboard. Can I use it for another purpose ? @mario So you are buying a new fretboard, that’s f...

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
RE: Repair fret slot cutted in wrong position

@marion I meant to set the veneer in loose but gluing would probably be better, leaving a small gap at the ends to fill with dust and glue. This can be made to look invisible with care. I would make ...

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
RE: Repair fret slot cutted in wrong position

@rocknroller912 It seems a good idea. When you said : "put a piece of veneer between the two lengths when gluing which will simulate the 15th fret slot" Do you mean that I should glue a small piece o...

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
RE: Repair fret slot cutted in wrong position

@mario Wlll the fretboard have edge binding. If so and you have spare material in the length then you could cut it through at the 15th fret and make the fretboard in two pieces discarding the mistake....

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
RE: My Shed

Posted by: @rocknroller912 This is a great move for you I think. Sharpening hand tools is a good way to learn woodwork. Most people rely on machines these days which takes all the fun out. Don’t get ...

In forum Guitar Building Tricks and Tips

5 years ago
RE: Repair fret slot cutted in wrong position

Hi @darrenking , In the case I buy a new fretboard. Do you recommend me a way to "recycle" the first fretboard. Can I use it for another purpose ?

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
RE: Accoustic kit ordered

Dot markers and side dots in followed by frets today. All ready now for the final sanding process tomorrow. Cheers. Attachment : 200956BB-54B5-4A88-AE05-39127D45ED92.jpeg Attachment : ACEB...

In forum Acoustic

5 years ago
Page 219 / 939

Robin

Profile picture of Robin

@robin

Active 5 months, 1 week ago
Rep Points balance: 17,152
Hero Points balance: 237
Rank: Knight