@koendb Interesting I’ve never seen a string break at the bridge on any instrument

True but it is a potent string break point. I think some of the old 50s and 60s designs have a lot of room for improvement @rocknroller912 I dont think string break is the issue, but tuning stabilit...

@koendb True but it is a potent string break point. I think some of the old 50s and 60s designs have a lot of room for improvement

Ok, we have settled for this spec, it is for a little girl after all. Next stop, Utah, USA. 🇺🇸 Hope it gets there in one piece. 🤞 Attachment : E2552610-4D7F-49D9-B8FD-8C4F2...

My favourite song today:

This is My Favourite Song For This Moment..... couldn't meet a nicer guy. Well, you could meet me.

it will be rubbing on the side on the nut slot which isn’t good for tuning. @rocknroller912 Well on a Les Paul, none of the strings are ligning up with the nut. You just have to cut the nut with a l...

@koendb I think that moving the peg hole may cause an alignment problem with the nut as the string won’t be pulling in a straight line, it will be rubbing on the side on the nut slot which isn’t good ...

@lizard I stand corrected, I misheard the lyrics. It doesn’t say “climate change”, it says, “a tide of change”. It’s still in there though, our behaviour is destroying our world. “When the burning sk...

To the future, we look, we must. 🤣 @russ Yeah, spot on. 🤣🤣🤣🤣👍

Wow. We've made 100 pages of favourite songs......if I ever have a spare week or two I might go back and look over them. @russ It’s good to look back from time to time Russ, we can learn from histor...

Attachment : 9FFEAF03-A648-4DCD-9500-0D766616166A.jpeg

What I see is communism. @lizard Ok but what I see is unbridled capitalism destroying the earth because the 1% won’t change their ways. Capitalism can be a good system if it doesn't become a danger t...

You could plug the hole and drill again where you wnt it. If you don't move it too far, the washer will cover the repair @Robin Yes indeed. I 'll decide that just before final sanding and finishi...

@koendb but it would have looked a bit nicer if that one came in a bit more from the center. You could plug the hole and drill again where you wnt it. If you don't move it too far, the washer will c...

Boo. I have listened to this a lot of times so far. My son and I actually already learned to play it, well mostly. Great song cant wait for there new album. Climate Change? That isn't what I see respe...

Today, I testfitted the tuners and discovered a small design flaw in my headstock. I should have left a bit more space on a few pegholes, they are rather close to the edge, and, the one for the G stri...

Well, some pictures are in the wrong cronological order 🙂 Yesterday, I flattened the headstock and neck. But apparently, during my rough cut on the bandsaw, I went in to deep on the headstock at one...

Last week I progressed quite a bit for this build Got my laminated neck blank from G&W . Attachment : IMG_20210721_181443172.jpg Made a headstock template Attachment : IMG_20210721_1816...

Climate change is coming but you don’t wanna hear. Are you ready for it? New song from Iron Maiden. The writing on the wall. Climate change is here.