Attachment : F_Standard_F_Locking_1056.jpg Hello Peeps, What's your thoughts on the best post size on these Machine Heads for a Strat style headstock? 🎸🙂🎶🙏

@e-den-hertog Thanks Edwin. I'll check them out too. 🙏🎶🙂🎸

Sperzel locking tuners can be converted from right-handed to left in a jiffy.........

@tv101 Cheers tv. I'll check it out. 🎸🙂🎶🙏

Posted by: @boo @russ Here you go and there are probably more out there. I've always found axetec's stuff to be pretty good quality / VFM (with special mention to their incredibly good VFM picku...

@boo Thank you for that Boo. Much appreciated. Cheers, Russ 🎶🙏🙂🎸

@russ Just remember that L doesn’t mean left handed or R doesn’t mean right handed. Imagine you are looking at a guitar when it is on a guitar stand. Look at the tuners. If, like a right handed Strat...

@russ Here you go and there are probably more out there.

Do you think it would be possible to replicate this look using 6L machine heads or would you have to mix and match with left and right ones? @russ You can buy a set of mixed tuners in that configura...

@robin Cheers Robin. It's good to know that it can be done. 😎 😆 👍

@russ My friend has replied, he used the standed kit tuners, so either 6L or 6R. He's on holiday just now and will send me a photo once he's home.

@robinThanks Robin. It would be good to see the pictures. Cheers, Russ 🎸🙏🎶🙂

would be possible to replicate this look using 6L machine heads A friend of mine built a kit with fender style neck and modified it to this style, I suspect that he used the six tuners from his kit. ...

Hello Peeps, Do you think it would be possible to replicate this look using 6L machine heads or would you have to mix and match with left and right ones? Attachment : 285314-VB1.jpg Attachm...

No surcharge with these guys, but there is a £12 minimum order @jonhodgson That’s great, thanks for the link, I’ve ordered from them. I made up the order with a few different colours to get it to the...

Why are people even bothering with the fillet? It's not necessary with a modern truss rod. @jonhodgson There is something very neat and elegant about putting the fillet in and it does save excess gl...

Why are people even bothering with the fillet? It's not necessary with a modern truss rod.

Incidentally, vintagetoolshop.com currently has a 10% off sale and a variety of block planes in stock. If you're not sure if it will be suitable, just ask them, if the staff doesn't know their boss wi...

@tej Thats what I did, a fill in strip to raise the depth where I was making it deeper for the adjusting nut. Necks are laminated anyway so it should be ok. I also had bad side tear out so cut a patch...

@tej Dont worry, my test run on an old neck blank of not very good quality was so bad I’m not even going to share it. I went too deep in one spot also but hand fitted a patch or two, using an off cut ...