Prompted by @clinton's finniting post/discussion, I'm tempted to finnit this one. @tv1010101 I think it’s a fantastic looking build and I bet it sounds great too. Occasionally I revisit old builds an...

Open tuning and play slide on it......

@johnnierox-boo Hi John et al, I have now finished pricing the little fret slotting jig and can confirm the following end user prices: Main jig - £37+ VAT = £44.40 inc VAT Scale length templates - eac...

Anyway, I have modified the drawing and have run a first batch of revised slotting jigs. I am going to record an assembly video over the weekend and then they should be ready to go. I’ll post more det...

And I've only had to enter my bank details, mother's maiden name, date of birth, and CVV number on a few sites ... @tv1010101 🤣🤣🤣🤣

Sorted...👍🏻 🤣

What’s are the P90’s? A stunning looking build.

That said, I wonder if there’s a similar recommendation for the best book om making electric guitars, preferably covering solid bodies, semi-solids, and arch tops. @rdenatale You might think this cou...

I level frets with a chunk from a 1m aluminium level - the bubbles had vanished and I was going to chuck it but my straight edge showed that it was very flat so I chopped the ends off and tidied - I h...

Glad to be of service!

I use the same crowing file with a piece of 400 grit to remove the file marks and 600, 800 and 1000 grit to remove the scratches of the previous grits. @e-den-hertog Thanks Edwin, that’s very helpful...

I level the frets with a long piece of 18 mm mdf with a strip of 320 grit or 400 grit, depending on the amount of leveling that needs to be done. I take of the sharp corners with a small fret end file...

DIY fret dressing tool...

Mark’s process uses crowning files, 150 and 300 grit followed by wet and dry round an old crowning file - then polishing with wire wool and synthetic wire wool..... Following this set of steps my fret...

I basically use the same technique Mark uses on the course of different grits of sandpaper using a fret file. I use one of these. I then us A fret end file and finish with wire wool. I have been kno...

If you don't like it, just make a new one.

I was wondering what everyone’s processes are for fret level, crown and polish are. I use a a levelling file followed by a long levelling beam with 240 and 400 grade for levelling. Then a triangular c...

You can buy small tins, or even little test sachets (Amazon I think) which is what I started with. @tv1010101 Thanks for that, I didn’t realise it was available in small amounts. I’ll go in search fo...

@johnnierox-boo Hi and thanks. Look for Leo Brown on fb. Mojo sound productions or similar. He recently remastered it and holds the files, I'm sure he'd forward it somehow. It was fun to do! Thanks ag...

So then, @markbailey, would this sort of thing be useful for you in putting some more content on your YT channel? If so, any thoughts on what would be good (or not)? Or, if not, perhaps we'll just do ...