My favourite song today:

Welcome back @cheesewhisk! I was wondering where you were... It’s hard to tell on an iphone but did you have to fill and re-route the slot? Either way it looks good and keep on keepin’ on!

Cheers Matt, been busy with work and not had anything to report until now. I didn’t have to fill as I only skimmed the first pass so it wasn’t that bad

@cheesewhisk Ah ok, cool. Obviously not a big deal as it won’t be seen later, so good job on fookin’ up!

Looks great. Routers the fastest way to a cock up. Love and hate em!

all things said, I’ve started and it’s going well so far. @cheesewhisk It’s all fine and dandy.

@darrenking I'm going to be needing some of your funky looking ply soon. Do you do 6mm sheets for applied tops?

Where do people get their veneers from please? If anyone needs some pieces of maple/mahogany/walnut veneer off cut just email me and I’ll stick some in the post. darren.king@bagpress.com Cheers Darre...

@peebee Glue some veneer to each side of your neck. When the glue has dried, use some 80 grit sandpaper on a hard, flat block to sand them down until the neck fits tight in the pocket. Make sure you s...

@peebee If I make a mistake like that it try and fit a solid piece of wood into the pocket instead of a veneer, because glued on veneers don’t route or carve very easily. It’s liable to tear because t...

Try cutting a thin bit on your bandsaw, double side tape it onto a lump of wood and use a block to sand..........

I need to get some veneers to fix my loose neck pocket fec up. Where do people get their veneers from please? @peebee Talk to @darrenking he may have some he could send you if you ask him nicely. &#x...

Why have I never thought of that! @tv101 Well that’s probably because @robin is superior at problem solving. And decorating sheds.

I may have measured twice, but check the guide rail was locked I did not. Thankfully I only ballsed up the first mm. Stopped and completely reset. Not bad for only the 2nd time I’ve used a router I th...

Thanks Robin, I’ll give that ago too. Ordered some veneer in case. It was cheap so no harm done.

@mattbeels I bet that@robinis gonna deck out the shed with dollies and runners when it’s time for tea and biscuits with the missus Are dollies and runners an American thing, I've heard of Dolly and ...

Next installment of the shed. The bandsaw stand is finished now. Normally it'll live in the opposite corner beside the door, it'll be fine there for doing the occasional small cut. I've made so that t...

@Peebee I need to get some veneers to fix my loose neck pocket fec up. Where do people get their veneers from please? Try taking a shaving off a bit of your body offcuts with a plane, adjust the dep...

There’s loads on flea bay I’ll give that a try, but thanks all.....might try and bandsaw my own!

Thanks Tv haven’t measured but I’d be surprised if it’s as much as .5mm either side.