.........here is the TV advert for 501's 🙏🙂🎶🎸

This is My Favourite Song For This Moment.......did any of you purchase your 501's after hearing this on the TV advert? 🎸🎶🙂🙏

Ayr is a long way from *most* places ... I'm not saying it's remote but their neighbours still paint themselves blue.

tv101 I did live in Ayr for three years in the 70s when I was a student but didn't have a bike then so never went out of the town much. There are some different routes from where I live none of them p...

No worries... I also have a hard time resisting the opportunity for a laugh, all good. 👍 @mattbeels Good man. 👍

@boo No worries... I also have a hard time resisting the opportunity for a laugh, all good. 👍

...have this tool below??? Attachment : image.png

@rajbcpa I just checked one of the acoustic builds I'm doing according the the Martin D28 plans. The bottom block glued onto the sides is 4 3/4 inches high finished size, so if you have this from the ...

I'm slowly getting together what I need to try out a few topcoat options (I've got Rustin's Plastic coating, some water and solvent based polys, melamine lacquer) with a view to making some test piece...

Might be one for Mark’s finishing course he’s still completing. I'm seeing information like this as (hopefully) useful support information for the finishing course. I'm trying to find solutions which...

I've found a number of historical posts on forums that suggest it actually works fine with a lot more products than the Rustin's official position would suggest Try and get hold of a sample and try o...

Try and get hold of a sample and try on some scrap? @deej That's what this is all about! I have a starter pack right next to me. I'll be trying it out on bare wood, stained wood (I have Keda dyes and...

@jonhodgson Well I for one am very interested to see what you come up with. I don’t have any place to spray either so we’re in the same boat, good luck!

Just caught up this evening...... eventually when I worked out that something had gone wrong with the Live Stream. Great idea @boo with the guitar 🎸 raising money for charity. 👍Ƕ...

Yeah - can’t remember the actual colour name it was a orangish red..if that makes sense . My friend had a white with blue stripes Mk 1 We should have kept em - worth a fortune these days.

Oh and at the time they worked great with the girls 😉

To bring this back to topic and most have answered but my approach is to draw accurately with a ruler and then clamp (or use double sided tape) a straight edge with enough thickness to route. Cut clos...

To bring this back to topic and most have answered but my approach is to draw accurately with a ruler and then clamp (or use double sided tape) a straight edge with enough thickness to route. Cut clos...

OK. I've sent a "begging" (well almost but at the very least subscribe to Mark's YouTube) email to Matt at Monty's Pickups asking if he'd consider donating some "hardware". Let's see. Cheers all.

Might be one for Mark’s finishing course he’s still completing. Alternatively I’m sure @boo will have some great ideas...he knows how to paint anything. Check his work.