@tv101...........Greese that is, not Georgia 🙏🎶🙂🎸

@seanwhcraig Hi Sean, I have an 8’ x 4’ CNC router with a 360 m3 per hour vacuum pump hooked up to the hold down table. However, when machining such relatively small components as guitar necks or head...

@darrenking thanks for the response. I have a Shop Sabre CNC machine and have been experimenting with different hold-down methods. Some work and some are so so. I am exploring using HDPE fixtures w...

Hi Sean, I run a business called Bagpress and we specialise in vacuum pressing and associated technology. If you can give me a bit more information about what you are trying to achieve, I’m happy to o...

Does anyone have a good list of parts for making a vacuum hold down for CNC for guitar parts? Have the HDPE and the gasket but I wanted to find a list of things needed for the clamp. Like a good sou...

Attachment : gougedNeck1.jpg I've gouged the neck, i think i will have to excavate it with a chisel and glue in a patch,,,sanding and scraping the whole surface after that..there are several scra...

@poco7 i think i have to start over with a new neck? unless Tight Bond will adhere a piece added to the underside so strong that i can salvage this by adding to the neck then carving? Personally, I ...

The neck is far from trashed - there's plenty of time for that later... After the neck is carved there is normally only about 3-4mm of wood left under the truss rod at the thinnest point: If the truss...

@jamesbisset Great song the other night James

@rocknroller912 Thanks Bill. Reckon that’s the next one to demo for the album.

Keep them coming @jamesbisset. Another sweet wee song last night. 🍷 🎶🙂🎸🙏

Thanks Russ. Reckon it might need another verse and some lyric tweaking, but it’s turned into an an ear worm for me. I can’t get it out of my head!

@jamesbisset. If it's an earworm James it a keeper. Keep scratching until you've satisfied the itch. 🎸🙏🎶🙂

@jamesbisset @tv101. Good to see you both back on the Bliss this week. 🎸🎶🙂🙏

Thanks Russ. I could do with making a new one, but Chez Bisset is a kinda inaccessible at the moment... Attachment : IMG_8588.JPG

@jamesbisset. That's some guitar collection james.......at least you do put all of them to good use. How's the album coming along? 🙂🎸🎶🙏

Good to hear from you @tv101. Hope all is well with you. 🙏🎶🎸🙂

A little late on this one, If these have been covered and I have missed them, I'd appreciate a pointer to them. First off +1 for droptop and for, head adjustment for truss rods. I's also like to know ...

Posted by: @cattytown First off +1 for droptop @cattytown Here you go, droptop. 👍

@boo Thanks 🙂