20mm is a little tight so gonna add another half on. Rod was actually 9mm with callipers so most of it is routed to 10.5mm and the bit for the adjuster is at 12.5mm depth with the wider bit. Used the ...

Opted to do a test on scrap, now have half a beautiful pine neck. It’ll be on eBay soon, don’t all rush at once. 20mm is a little tight so gonna add another half on. Rod was actually 9mm with calliper...

Here we go 🙂 This is the truss rod I have which gets quite big at one end: Attachment : 51148BFE-5B5F-4AD1-AEA1-E12068AD7BD6.jpeg @markbailey, or anyone else for that matter! The video ...

What’s the difference? I always thought they were two names for the same thing and a quick goofle search seems to confirm that... @mattbeels I’ve no idea it just wasn’t clear! I’ll watch that video t...

@mattbeels Probably the best explanation of various truss rod types I've come across, from a friend of the channel.

@tej What’s the difference? I always thought they were two names for the same thing and a quick goofle search seems to confirm that...

Stalled at the start line, so after deciding to go with the longer fretboard I needed a new longer truss rod, it arrived this morning but was the wrong one. I’d assumed “double action” what the same a...

I quite like it though! @tej I like it too, it’s asymmetrical now but there’s nothing wrong with that. It’s a different beast but it look balanced and I bet it would be really ergonomic to play. I do...

The adjusted horns based on Marks suggestion, going to leave it for today and see what I think in the morning I reckon, I quite like it though! Attachment : 84E9D52A-4EA9-4D6E-B072-946A5AE84522.jp...

@boo thank you for posting those, really helpful to see!

@tej This is the second Bandsman where I carved more of the bottom horn away. Attachment : EF5D5332-7C34-4563-B8A4-AB17E0BEE3CC.jpeg Attachment : 356915AD-6D7F-44A2-B023-2E9427B6BA7C.jpeg ...

@markbailey thank you, i like the suggestion for reshaping too, means I can modify the template I made to instead of doing a new one 🙂

Looks ACE ! If you want to adjust the horns for better access I would suggest something like this: Attachment : C54C869C-F1FD-407F-A296-42A4F4A6FB7A_1_201_a.jpeg

@markbailey so I’ve adjusted the design to take the 24 fret board into account the neck join as I have it would be from under fret 23 to the front of the neck pickup cavity, I think? So the part I was...

Nearly finished, few bits and piece to sort out... Attachment : D8EAE47E-CDE7-46C7-8BC2-29B57EC5105A.jpeg

Autocorrect is beating me here but mostly it makes sense

@tej There is an easy way to get broken screws out, it’s debated a lot LG guitar forums. Fing a small metal tube just the diameter of the screw (hobby shop or Amazon). File some sharp teeth at the end...

@rocknroller912 Not these ones, the taper was short and I just used a drill bit that’d have been fine for pine and not much else so I can’t lay all the blame with the materials 😬 Just hope I c...

@tej One thing that’s often forgotten is that some screws get thicker along the shaft where there is no thread so thats the part the hole needs to be drilled for. The thread part will find it’s own wa...

@rocknroller912 I’ll have a look, it does bug me, I’d happily pay the extra 30p on a set of pickups for them to come with quality fixings, as I said though the pilot hole was too small. I’m not used t...