Nice clean work there, looking great. 👍

@usadave good looking job so far

@tv101 I always thought of them as New Wave, but even then... they’re DEVO!

From what I've seen of your spraying work, you have a definite skill there. I agree with you there @TV101. I think I need a crash course lesson at yours (or mine) when all this blows over...I think y...

Bloody hell guys you’ve been busy. It’s going to take me weeks to catch up on all the chat..

That statement is missing a “don’t” somewhere ... 🤣 🤣

Rather you than me @tv101. I’ve always had the luxury of sitting in the mix with a band...hides a multitude of sins (bum notes). I can’t sing for toffee neither.

@darrenking My 80grit roll is 4 inches wide so I shouldn't need too many strips to cover it. I've had it since 1988 and it never seems to get any smaller. Mostly I use planes and scrapers.

Hi Bill, I don't blame you. I think big disks are so dear because of the amount of waste form the main abrasive rolls that they are cut from, which I think come in at about 1300mm wide. Even staggerin...

@darrenking Thanks I will just go for the disc on its own and use strips of 80 grit for sanding as I already have a 50 metre roll. Did realise the sanding discs are so expensive. £50 is a good price c...

Hi Rocknroller, I'll check the price but I think the 760mm diameter P80 self adhesive disks come in at around £30 each. You could just stick on strips if you prefer, you get quite a lot of sandpaper o...

@darrenking Yes that makes sense from the diagram. I will need an 80 grit disc please but if you leave it loose I can attach it myself. Thanks Bill

Hi Rocknroller, I have been thinking about the best way to machine this dish for you and from a cost point of view the most economical would be to make it 600mm square but for the dish machining to be...

@darrenking Thanks 650mm will be ok and I would need a sanding disc as well please. I live in Annan SW Scotland DG12. If ordering through M&C they have my full details in the members area. I've or...

Hi, ok, no problem. Let me check with M&C how they want to deal with the radius dish order as we haven’t discussed pricing for this product yet. My standard size would be 650mm diameter circular ...

@darren Thanks I will check the site, see which ones I need and put in an order today. My mitre box was from Tonetech which is I think similar to Stew Mac but didn't have any templates included. Also ...

Hi Rocknroller, Yes, 75mm wide and yes, I can send a drilling template to help you position the holes in your jig if this would be useful. Just order the template(s) you want from Mark and Carol and I...

@darrenking Thanks that would be helpful

I might even have a section of prototype or reject template that I can send you to use to align the holes. I’ll have a look tomorrow. Darren

@darrenking Thanks Darren I will check mine tomorrow but this sounds good. Drilling holes in mine shouldn't be a problem.