Posted by: @poco7 Aghhh, the Blessed Learning Curve... Yep - that's what it's all about! I don't think it matters what glue you use but I would probably use wood glue to make sure it bonds OK to t...

@markbailey @robin Awesome news...thanks, the dust 'fill' seems good...should i use super glue or tite bond? does it matter? I appreciate the good word...my slot is generally 12mm +/- as noted... I'm...

@robin thanks Robin ...OK, if I went that route, i can see the extra thickness under the truss rod...but, that would mean i would have to laminate my peghead as well, right? ...which means the dominos...

The neck is far from trashed - there's plenty of time for that later... After the neck is carved there is normally only about 3-4mm of wood left under the truss rod at the thinnest point: If the truss...

@poco7 i think i have to start over with a new neck? unless Tight Bond will adhere a piece added to the underside so strong that i can salvage this by adding to the neck then carving? Personally, I ...

Attachment : gougedNeck1.jpg I've gouged the neck, i think i will have to excavate it with a chisel and glue in a patch,,,sanding and scraping the whole surface after that..there are several scra...

nice work, sounds very good too!

@wayne_f Nice 👌 🙂🎸🎶🙏

@wayne_f Very cool. That came out looking great. It is a unique design. Well done.

@wayne_f That's looking good, well done.

@wayne_f that's a cool design.

Hi @wayne_f I tend to agree about the angle of the string from the nut to the tuner due to the wide headstock. If there is too much friction on the string in the nut slot this can make tuning, and sta...

@wayne_f yea it is. It’s white mother of pearl in celluloid so it soaks up the stain too. And that’s my first attempt at inlay. Figured why not, right? After all, this is a first in itself so why just...

Posted by: @wayne_f @russ Haha really? I don't see it. Attachment : P8041_710-29297_01_full.jpg Attachment : P6506_710-07590_01_thumb.jpg It looks good to me @wayne_f. Have some fun b...

Here it is y’all. Attachment : 8896D09C-7CF8-466D-9A0C-5FC49700E591.jpeg

You've got a bit of a Pokémon vibe going on there @wayne_f. 🤔 👍 🎶🙂🎸🙏

So long as the tuner posts don’t get in the way of the next string, from a practical point of view, it will do just fine. The design is definitely different and I like that. It’s unusual and perhaps n...

@wayne_f I tend to agree with Robin, trying to make the taper inwards on the end and make the headstock edges follow those lines.Nice idea !

What do you guys think? It's a nice shape @wayne_f . It's a bit wide for my personal preference, I like to taper it in towords the end rather than out. That keeps the strings straighter beyond the nu...

4th Bass Build Attachment : 6B1954CC-BC39-48EA-8ECF-9AEB175CAF5D.jpeg Attachment : 15DE9FA3-C37F-4582-B7F9-20CD34689F3E.jpeg Attachment : 9801458A-6BA8-4B87-9FE8-F8A573AFBA33.jpeg ...