So... a new blade arrived, I fit it... I set the table nice and square and the bandsaw cuts in nice straight lines. Thanks all. 🙂

Made the headstock angle jig today. I figured that I am only using it to clamp the neck and route the headstock angle so I made it a little bit shorte...

When I fit the new blade and set everything up I will check the fence. But it wanders without the fence although I guess the table surface may have be...

Yesterday I made the neck heel angle jig. I've never made one of these before and angling the heel of a guitar neck is one of the top mistakes I've m...

I've had a go at making guitars in the past, but they generally turn out bad. In fact bad is giving them too much praise. I've made so many mistakes t...

@markbailey I am happy to post the entire 'blog' here and not to the wider Internet? I find that when I write stuff down it makes me do things better....

@markbailey Thanks. ??

@frocesterbill Thanks, must have missed the pdf! ? anyway, I have ordered a 3/8 blade from Draper. I’ll report back when I’ve installed and tested it...

@syntholabo That's a really good video, thanks. Incidentally the blade snapped today! I'm going to try a wider blade take look at the setup.

I see this is an old post but... I'd like to see a paint spraying course. 🙂