Install the Front Dots
Mark the Neck Tenon
The first stage of fitting the neck is to cut the Tenon, so it must be marked out as accurately as possible - Use a sharp pencil!
Sand the Fretboard
Cut the Neck Tenon
The Neck Tenon is made with four cuts - here I demonstrate the method to achieve this.
Prepare for Fretting
Mark Out the Neck
Prepare the Fretwire
Route the Truss Rod Slot
How to route the truss rod slot - including setting the depth of the slot and how to get the best results.
Install the Side Dots
Bandsaw the Neck
A tutorial on cutting out the neck profile, including close ups of how to tackle the tricky areas!