Attachment : 01d0e1794ce015cb6e32c68d37db2326.jpg 😋🎶🎸🙏

Got off work early today so I decided to get going on the neck carve. I was shooting for my favorite asymmetrical neck carve which is on my PRS McCarty 594 as my profile pic. Took me about 3 hours and...

@boo, looking into it further, 480mm works, well close, for a 24fret fretboard, but for 22 frets then the distance between the to width measurements drop to 457mm. If you have a 22 fret fretboard but ...

Another satisfying moment carving the vellute today. I watched the course video again last night, then followed Mark's instructions and the vellute miraculously appeared. Attachment : 20210106_182...

@robin, you can also line the neck pocket template with tape just to shrink a little and give a snug fit.

Hi Peebee Its worth noting that there is a difference though and it may / will affect the neck pocket size, so follow this part of the on-line course with a note of caution I would suggest. My heel ...

@Robin, I think you’re right as the distance to the 24th fret from the nut is 476.252mm so close to 480mm. My kit is a 22 fret, so 457mm, just checked again as doubt briefly crept in. Its worth notin...

Hi James, have you thought about using laser cut veneers? Darren @darrenking any chance that you can send me some info about this? Cheers

Hi James I'm in two minds about your logo font. To keep with the Mackintosh style, then straight, and I think that suits the gibson style headstock. I would say the sloped one looks better on the tap...

@jamesbisset I think both versions of the logo look great! Almost hard to choose... I like what you did to the LP headstock, that little hole makes a big difference.

Hi James, the top two look great but I don’t like the italic version. The font is stylised enough already IMHO. PS I have a laser cutter! ..... Cheers Darren

Posted by: @ I prefer the straight up and down James..... looks great. 🎶🙂🎸🙏

have you thought about using laser cut veneers? @darrenking A’m no daein’ it masel! I was thinking of smallwondermusic.co.uk as recommended by Bailey Guitars, or rothkoandfrost.com where I spotted th...

I wonder if there are any other aspects of Mackintosh design that you could put into the guitar. Whaddya reckon? Willow Tearoom or Cheap Trick’s Rick Nielsen? Attachment : Screenshot 2020-12-29 a...

I think whatever you go for, it should be design unto itself, not dependent on the shape of the headstock. Here are a few tests, just to see... Attachment : bisset logostyle test 2.png

Apologies for the Edit button and Quote buttons not working. It is related to a discontinued plugin the site uses. The team have fixed it but it breaks again when updates happen - we are working on a ...

It is a great looking logo! You are worrying too much... Providing you use Ebony Veneer and Black Superglue any gaps will be pretty much invisible. My advice is just do your best with the dremel for t...

@mattbeels Mackintosh is a particular style of 19th Century Scottish art and architecture, difficult to put into a guitar style. It's character is straight lines and right angles

Hi James, have you thought about using laser cut veneers? Darren

@jamesbisset Yes, oblique/italic whatever it’s called idk I fell asleep in typography class 😄 Don’t get me wrong, the logo looks great but to my eye things tend to look better a bit slanted. I...