@koendb I’m sure Mark did a live stream on neck through construction.

I challenge you to cut those horns with a router. @rocknroller912 or perhaps a sharp spoon!?

I’m sure Mark did a live stream on neck through construction. @rocknroller912 where can I find his livestreams can see a link from Here too them. Am I missing the obvious Here?

Thank you, Koendb

Thanks for asking, Tej. I've successfully built my prototype, and have since finalized a multitude of mods, from body shape, pups selection, harness, to final headstock design and neck/board construct...

@hudsoncustoms sounds like you’re starting with a much clearer view of the end game than I did 😬 Any pictures you’d be happy to share?

@rocknroller912 I’ll keep that in mind if I ever make a “real” guitar then. Measuring the string lengths nut to bridge on another guitar with the same scale length suggest the adjustment should be mor...

@tej If it’s got side adjustment it sounds like a plan but I’m not an electric guitar expert. If your neck is a tight fit there shouldn’t be much difference between the test fit and the final. I can s...

@rocknroller912 this is the bridge I have below. It’s a little different to the one @markbailey uses in the video. I was planning to mount it with the posts in line with the scale length line but 6mm...

@rocknroller912 it’s a gotoh 510UB my concern is around possible need for lateral movement as opposed to the intonation. I’ll set it up on some scrap and see what play there is in it.

@tej What type of bridge do you have. If it has some intonation adjustment that should take care of any small changes after the neck is glued.

@frocesterbill that was my thought but there’s no play in it, I’ve rushed a few decisions on this build and things haven’t always gone to plan, hence the paranoia!

If your neck pocket is tight then the neck will be in the same position so you should be able to drill bridge holes now - can't see it being a problem - only issue would be if the neck can wobble side...

As I need to apply the guitar finish before glueing the neck I’m not sure when to drill the holes for the bridge. Current thought is that I could dry clamp the neck in now and drill the bridge holes t...

I’m still trying to get a wood order from Belgium that I placed in November 2019 2019??? I would request a refund 😡

@koendb Brexit has made life difficult for guys like us. I’m still trying to get a wood order from Belgium that I placed in November 2019 for which I paid Belgian VAT and no doubt I will have to pay U...

Attachment : IMG_20210617_141820089.jpg Just received my copy today.. it is SO expensive now, especially since brexit

For anybody who's wondering whether to order this I'm going to say that not only does it contain a lot of useful information, but even if you never actually read it yourself it will make an excellent ...

@powerful Pints certainly do come tonight, after a long motorbike ride in the sun I’m ready for a few.

@rocknroller912 I doubt very much he'd go for an oil finish. He just commented he might want to go for the same colour as his AC Cobra replica, which I can see working. Attachment : steves_cobra...