Hey @marcel. You're all grown up again. 😁 🙏🎸🎶🙂

This is My Favourite Song For This Moment......if this doesn't get you dancin', nothing will. 🙂🎶🎸🙏

This is My Favourite Song For This Moment...... just chillin'. 🎶🙂🎸🙏

Yep, first time used in anger Russ. It’s rather good, I’m really impressed Very neat @boo. Looks great. 🙂🎸🎶🙏

For anyone who’s interested there is a lesson in the Acoustic course on laminating headstocks. Just watched that 2-3 weeks ago @tej. All good stuff. 👍😁 🙏🎶🎸&#...

Mark's knowledge is invaluable to us. Couldn’t agree more @russ. For anyone who’s interested there is a lesson in the Acoustic course on laminating headstocks.

@mattbeels pretty much but I’ll sand the veneer to roughly match the rough headstock profile. Suggestion from Mark is to drill an 8mm hole and ream it out to 10mm to remove chance of breakout. Don’t h...

@russ so I mentioned to Mark about this and I need keep the headstock “core” over 13mm That's good to know @tej. Mark's knowledge is invaluable to us. 🙂🎸🎶🙏

So what’s your plan for this repair @tej? Glue on one veneer then drill out the four tuner holes and then repeat?

@russ so I mentioned to Mark about this and I need keep the headstock “core” over 13mm which makes sense, I think I might just surface route .5 to .8 mm off each side and then route the veneer down so...

Hi @tej. If you haven't already glued it down, you could rout another 1mm off the headstock. If you have then be very careful not to rip it off with the router. Maybe you could just sand it down. &#x...

Haha @jonhodgson, here’s a rather non sexy photo of mine... not like @boo... his photo so sexy, me so jealous! Attachment : image.jpeg

No-More-Sloppy-Neck-Pocket-O-Matic I think that should be the official name laser etched on the jig

Is this the first guitar to be built with this neck pocket jig @boo. 🤔 🙏🎶🎸🙂

Good job @boo, putting that No-More-Sloppy-Neck-Pocket-O-Matic to the test! 😉

@tej It's neat isn't it? That guy builds a lot of very cool things, including most of his workshop, and always to a really high level of precision.

@jonhodgson that looks fun, I think if I used a lot of dowel pins it’d be worth knocking together. Certainly quicker thank my little lathe!

So the dowel cutters I have are utterly useless @tej, I saw this video just recently.

So the dowel cutters I have are utterly useless, at least two of you can guess where hey came from? 😉 Had to turn some on the trusty toy lathe. Have some ebony and Indian rosewood veneers on t...

I think I’d rather laminate it than paint it for this build, I’ll have to find some nice wood to do that with as I’ve nothing I can use. I’m presuming this is “simply” a case of roughly cutting the la...