Started the carve today. Attachment : 20210120_105414.jpg Attachment : 20210120_104345.jpg Attachment : 20210120_101324.jpg Attachment : 20210120_102946.jpg Attachment :...

Good job @peebee Glad to hear you were able to work around that neck joint problem! Looks like you’ve got some carving to do, best of luck!

Some progress today. Only balls up was routing the full depth of the pick up before the neck pocket, but luckily managed to rout the neck pocket to full depth as the body is thinner than a real one, b...

So it’s official: I signed the contract for my new workshop yesterday and will move in March 1st! Possibly a but sooner depending on how fast the current tenant moves out. It will be a total of 6 mont...

Excellent timing - my (Baileys) acoustic kit is waiting to be built - this will get me energised to get on with it!

@markbailey Cheers for another great stream, keep ‘em coming!

The magic starts at 3:10 - could have kicked myself... BTW: I'd use a 2.5mm for the bridge mount holes next time...

Hi, and a warm welcome from down South. This is a brilliant place for expert advice and support. When things don't go the way you expected you will discover many others who have been down that road. S...

Hi Dave, welcome. I would be less concerned about the bow than the knot but if the neck blank is making you have to think about how to avoid the defects then ask for a replacement. This is one of the ...

Attachment : toon-3043.gif 😋🙏🎶🎸

This is My Favourite Song For This Moment...... it's been a while. 🎸🙂🎶🙏

Got to agree with Darren about sanders - I've got a Mirka - obscene price at around £400 but totally brilliant - Mark uses one as well!

Hi Matt, I have to agree that Festool stuff is sodding expensive but it is designed for professional use and it is far from being just a posh labelling exercise. I would find it pretty much impossible...

DeWalt 621 is a great little router and probably has the best dust extraction of any that I have ever used including my Festool routers. If you see one in good condition on eBay snap it up. Darren

The Bosch GKF is perfectly adequate for the job. Cheers Edwin. Much appreciated advice. 🙏🎶🎸🙂

The Bosch GKF is perfectly adequate for the job. Like mentioned before, go easy, take small cuts and you'll be fine. Got one myself and build a Bandsman with it... 🙂 I also have a green Bosc...

Hi Boo! Bad luck but far from the end of the world. I have had this happen many times with drills of many sizes! At least the hole with the broken drill in it isn’t going to visible so you have a few ...

@boo That f$$king sucks!!! I have that “screw repair kit” or whatever stewmac calls it. You can make your own removal tool by cutting teeth into some brass or aluminum pipe, but I’m guessing that’s wh...

I think the wind chime method would be good for that one Boo.