I wanted a swirly pattern so I got masking. Attachment : 883D76BA-35D9-4B3F-89FB-8D18E9657130.jpeg Attachment : 82B6D75D-EF0B-4287-8DD8-597ED416EE4F.jpeg

I wiped all the candy off this guitar and started with a clean slate again. I played around with some masking techniques, trying different shapes and patterns. I then had a flash of inspiration and ch...

Well, today, I did some final touch ups on the curves of the sides and they now remained within a few mm from where they should be sitting.Then sanded the sides with 80, 120 and 240. Next: Kerfed Lini...

@koendb They look fantastic. Well done

Posted by: @russ They're very elusive creatures @boo. The best way to catch them is to lay at trap with sea salt on the night of a Full Moon. 🤔🪤 @russ Thanks Russ, I’ll bear that in...

Posted by: @boo 🏴󠁧󠁢󠁳󠁣󠁴󠁿🥃 (there is no haggis emoji) They're very elusive creatures @boo. The best way to catch them is to lay at trap...

I’ve just found something online that I find interesting. Some older guitars/stringed instruments don’t have truss rods installed in the necks. So, how could you adjust a bow in said necks if needed? ...

Never built a pickup before, but here's my first one. 4 poles, 2 Alnico 5 magnets that were meant for a Firebird pickup, arranged the same way a regular P90 pickup would be arranged. 10,000 turns 42A...

Neck and fretboard are unified. Truss rod is fitted, tuner holes are drilled and screw holes are pre-drilled. Next up is finish profiling the sides of the neck (they're approximately 1mm oversize to ...

Although I can’t add anything, I’m loving this conversation, very interesting stuff. I’m so happy with the thought that people put into these forums, always thinking of others and how things will cont...

@darrenking Degree subject for sure

@koendb No worries you have a very smooth looking set of sides and I think it’s going to be a great guitar. I might not make the video on Tuesday as I’m being pressed to do a booking for Burns Night a...

@bpower My understanding is that thicker wood dampens sound vibrations, however I’m not sure how this affects the sides. I think that you are correct in saying the thickness is for bending. I’m leani...

Posted by: @bpower someone like @darrenking may be able to correct me I am really not in a position to ‘correct’ anyone and I think we’ll all find that the longer we stick around, the fewer examples...

Side bending job done, now the pics: Attachment : IMG_20220122_225153919.jpg Attachment : IMG_20220122_225431530.jpg Posted by: @rocknroller912 You can show us on the video call next ...

Posted by: @rocknroller912 Are you building on a flat board or using a mold. @Rocknroller912 I am using a flat board just like Mark does in the course. Posted by: @rocknroller912 I wonder if the ...

@rocknroller912 thanks.

@powerful Looks like a great job

bridge position checked and double checked twice and all marked up now ready for spraying. Cheers Attachment : A0393205-F840-4C30-922C-1BA276EB6274.jpeg Attachment : AE4CB953-61DB-4878-A68...

@markbailey Thanks. Can sleep now in peace. Cheers