@boo Thanks for sharing this, it’s giving us all a free masterclass in painting

Unmasked and left to dry. There is a little splatter of primer from the gun left on the surface, that will just sand flat when it’s dry. Attachment : 7F184A13-F73D-45B2-9AA7-41F3D80931B0.jpeg ...

Couple more coats and it’s looking much better. I’ll let it settle for a couple of days and sand it, again. Then I’ll check to see if it needs even more primer. Attachment : 23061B53-EF88-4486-AA...

Time for the nitro primer. 1st coat is very light to check for reactions, you can still see the shadow of the isolator paint bleeding through. That will disappear when opacity is gained with a couple ...

Posted by: @tv101 just been busy with "life" 'n' stuff, so done no building for a few months. I had some grand plans involving some Bagpress bits, but then life happened and I've not even opened the...

Wow 🔥🔥🔥🔥 SLASH 🔥🔥🔥🔥🎸🎸🎸🎸🎩 Superb guitar solo. 🎩🎸

May I share

My favourite song today:

@tej People don’t say that to me very often

@tv101 Thought of you as soon as I spotted this Attachment : 8DD16D9D-F64C-4ECA-B010-817E7D3AD146.jpeg

Also, if you watch closely, you might catch a slight mechanical mishap with a piece of equipment (which I forgot to edit out. oops)

To clarify, I bought (from StewMac) medium/high fret wire as opposed to medium/medium. This means that not only is the crown higher but also the tang is longer.

Very nice work on the logo, it’s good to see work like that being done by hand and not using CNC. Also like the fretboard as it’s the way I started many years ago before it got fret templates and a fa...

I do like the look of that @jmcmi93888. 👍 🎸🙏🎶🙂

@jmcmi93888 And now.The headstock logo. That's great work, I do like that. That's a skill that I'm going to have learn.

And now.The headstock logo. Attachment : template.jpg My "Thistle" logo was adapted to suit the narrower head and transferred onto 1/64th plywood then taped onto the headstock. careful scribing...

More photos for your amusement. Attachment : trussrod.jpg Carbon fibre truss rod. 8mm x 4mm. Dremmel routed a 3mm slot then widened it with sandpaper on a 2,5mm bit of ply. Attachment : fr...

So the edit button works?!? Awesome, now where’s that @tv101?

Posted by: @russ It's well insulated and will soon be properly ventilated. If that’s the case you shouldn’t need a dehumidifier should you?

Posted by: @russ if I manage to keep it tidy One thing worth doing is to figure out which tools you use often and mount them to a board on the wall. I’m very limited on space here and can’t do that ...