Nice job with the cover plates @Clinton, you make it look so easy.

So it's 300 year old Mahogany @clinton? 😉 😉 😉 😉 😉

Success with redrilling the tuner holes today. Glued the plugs in yesterday and sanded flat today. Plunged a 3mm hole with my dremel the drilled with a 4mm to 12mm step drill. I drilled each step from...

The mother of all basses is the Precision bass. About 3 years ago I made one. Alder body, flamed maple top, maple neck with a pau ferro fretboard. Attachment : image.png The pickup is a Seymour...

Thanks everyone for the good advice! Fingers crossed that I don’t waste this neck! One last shot of the neck with fret marker locations marked. -D Attachment : DD5DD2AA-D030-43AB-9E50-28201D77CDD...

Now I've finished the second of the pair I started last June, here it is. Hope you like it. This time I was practicing using Mahogany back and sides with abalone purfling, rosette and head stock bindi...

Did a bit more today, got it all rounded over. Not done much today I know but there are other things taking my time up, like airbrushing and painting. If you remember, the heal and the headstock on th...

After myhowling balls up with that neck the other week, I wanted something to do whilst waiting for replacement wood so I decided to revisit the first guitar I made. It started life as single humbucke...

Truly is what I look forward to in my life these days. Puts a smile on my face. Very happy with this one. Gonna burst this one. @clinton Looks amazing as usual Clinton. I still haven’t tried making a...

@Clinton That would be tricky taking the material off on top of the binding. Thanks Clinton, challenge accepted. 🙂

Did a bit of neck carving today, I’ll finish it tomorrow. Attachment : 88D4F465-72B6-4393-A13D-419FEA198403.jpeg Attachment : A04C410A-41C2-4126-BD83-92A9F98F5D60.jpeg Attachment : ...

The first pliage has been pliaged! I only had time for one very quick test before I left work today but it looks VERY promising. Given that I didn’t time anything or do anything more scientific that c...

Should have also said that those necks look a treat.

That is a great little video, I love the way you get the heat on the binding! Nice work @clinton.

Did you know Leo Fender does not play guitar? That’s true, he didn’t play. He could probably bang out a few notes or whatever just so he could test things. He owned a radio repair shop and musicians ...

Looking great as usual @clinton, I like your style 💪

Attachment : 20210122_201247.mp4 Idigbo Neck Maple Fretboard SS frets Abalone 4mm dots

It’s been missing for 3 months @clinton Hard luck Clinton, it will turn up when you least expect it. You are doing a great job without it though, great video. 👍

Had a go at the neck carve, on the whole went ok, also trialled fitted it to the body. A couple of learning points, be careful of the fret board and how close to the table you clamp it, ruined the end...

My neck heel carving is done now, that took forever to get to a shape that I'm happy with. I had to take off a bit more than I had intended, due to my first saw cut going a tad too deep. Attachment...