On a GM live stream - ‘can we get a closeup’ - ‘different camera’ - ‘focus tiighter’ - crash................

That New Chisel is Just a Little Too Sharp. ??

NO! Not Cut Twice, Measure Once. ??

Made The Sound Hole A Little Too Big. ?

A Little Binding Should Do The Trick. ?

Needs A Little Fine Tuning. ?

Give us your Q's - plss!!

Let's have your entries for the Caption Competition!

Hey Russ - This won't help you but... I famously made a guitar case when I was at school because they wouldn't let me make a guitar...said it was 'too hard'. Been proving them wrong ever since. The ca...

@a-p-p-o I'm going to talk about this on todays livestream - Cheers!!

Sooner or later the time will come when you need to sharpen your chisel. I'm going to show the an easy way to achieve a razor sharp edge - whatever your budget!

Posted by: @david-johnson09 Posted by: @russ Posted by: @david-johnson09 New bench made over the weekend, and found the bobbin sander... Attachment : 568986AE-3C58-4F30-85B7-2C299390F165.jp...

They look beautiful - A match made in heaven! Let us know how you get on with them - THANKS for supporting us!!

PRS style body carve....

Posted by: @david-johnson09 Install a 5 way switch without a pickguard...pitfalls if the body is curved or flat etc.. I’m going to be putting one of those into my Whoopsie.

OK ... here's whats happened so far. 1. A bit of precision sawing. I love my Japanese saws. This is a tiny piece of offcut. 2. Lets put a screw in it. 3. The screw is just to give some...

Another option might be to cut off a section of the body and glue a new piece on - if you have an offcut from the body blank it might work...

I'm currently attempted option 4. That's like option 2, but without cutting a hole in the back to get access to the underside of the hole. Step 1 has worked (I've got a piece of wood glued in place), ...

Think option one would work.........

That's bad luck...fingers crossed for the repair. At least you have option 1 as a fall back - and if all else fails