Some YouTube stuff I found a 5 digit counter, a sewing machine motor with foot control, a pulley, axle and bearings on eBay - most of the bits are coming on China - sewing machine motor d...

Will sort some details tonight!

I watched 4 or 5 YouTube videos about building pickup winders - basically a motor with speed control driving a shaft that the bobbin is attached to and a counter attached to bits of wood.... Counter a...

Interesting video - good looking and sounding guitar!

Any video coming from the workshop courses Mark?

The blank as it stands is 70mm wide once the profile has been cut two bits of Walnut will be glued on to the body bit to make that bit 100mm wide - my bandsaw’s max cut depth is 85mm.

I have bought some bits of wood over the last couple of months to use in this build. The blank needs to be 1150mm long and 80mm deep to fit in the headstock and the body angle. I had two pieces of M...

Anyone here built pickups? I had some spare time at work (work in IT in some schools and had a day where I press a button every 10 minutes to get some PCs configured) and looked at some YouTube stuff....

Absolutely gorgeous!

Thanks Darren - what a useful graphic!

Use the Attach Files button at the bottom of the editor.

Welcome MD54! As Jonathan said this is a friendly place and the videos are really good - my first home build went really well. And apologies for crashing into your thread a few days back! You aren’t v...

Think the Gibson 335/345/355s have a centre block - the top and back are carved - side laminated....

Butting in on this thread - apologies MD - how long would building a body like this or a Gibson 335/345/355 take on a workshop course if the neck was already built - just thinking forward to 2021...

Thanks Mark! I will draw it out tonight.

Break angle question - my Firebird plans have a headstock angle of 14° - I am adding a trem. The Duesenberg Trem 2 replaces the tailpiece and will do gentle wobbles nicely. Do I need a more shallow h...

My Firebird plans arrived a couple of days back. It is a long guitar but the body is quite thin. The headstock angle is 14 degrees - does this cause problems or help with tuning? I would like to ...

I have already learned about cheap tools - some of my tools will get very light use - the planer (second working that is) has given a good flat, smooth surface to a couple of bits of pine 4 x 2 so fa...

Enjoyed the Livestream but had to watch on Sunday as I was out on Saturday. Are you going to do bits from your BYO workshops again - enjoyed watching the last one - does it take much extra work?

And before anyone comments I won’t be burning it in a ‘Crimson’ moment.......