Attachment : 20250330_131059.jpg Attachment : 20250330_131039.jpg Attachment : 20250330_131021.jpg Now it may seem strange to start with some photos of a complete guitar but this is ...

@boo welcome!

OK all you Fender experts out there. I’ve got someone who wants me to make him a Tele with very simple spec BUT has specified a wide neck. Does anyone know if there is a recognised wide size for a Te...

To avoid breakout I no longer route the headstock profile and use the method described by Brian here... I think I would try sanding/scraping the top face of the neck to remove the marks left by the co...

@jonhodgson Totally agree with Dan's comments and would just like to add that routing the headstock shape can be tricky, maybe better to cut close to your template lines on the bandsaw then use belt s...

Attachment : IMG_8568.jpeg Attachment : IMG_8572.jpeg Attachment : IMG_8570.jpeg Attachment : IMG_8574.jpeg Attachment : IMG_8587.jpeg Attachment : IMG_8576.jpeg ...

If you think you have seen it or something like it before you probably have. Built similar guitar for a friend last year that worked out so well I just had to do one for myself. It took a while due to...

Hey Jonathan - That's normal. We normally push it as far back as it will go (towards the body end). This way it cannot slide back any further so could only potentially move forwards but - it won't mov...

@liebe thank you

@russ I did and do, well, until it ran out lol.

@somethingnicer I used that on an oak fretboard, seems fine but it's also super easy to re apply later if need be.

Failure 2, somehow when I was trying to route the deeper part of the neck sides (longer than my cutter so I had to take the template off) I managed to set things so the collet wound up rubbing. I knew...

Not one, but two failures today. The first I can put down mostly to bad luck, though maybe better router technique would have avoided it, the second was 100% facepalm when I realised what had happened...

So now we get to the night I'm starting these posts, I went in to the hackspace thinking I would have a whole evening to myself to work on the guitar, no shop projects, no hackspace system admin, no i...

Attachment : headstock angle.webp For a couple of reasons I took a slice off the top of the neck blank, then flattened it again using the planer. When it came to routing the headstock angle Mark's...

Attachment : Fretslots.webp I think you may recognize the jig. This was the first day of the London Craft Festival, and I had spent the whole day talking to people trying to convince them to join ...

So having joined the London Hackspace in the hope of using the faciities to build guitars and other cool things I somehow wound up first as a maintainer organizing the woodshop and then as a Trustee (...

Bandsmen Attachment : IMG_8543.jpeg

prs style guitar build Attachment : picture1.jpg Attachment : picture2.jpg Attachment : picture3.jpg Attachment : picture4.jpg Attachment : picture5.jpg Attachmen...

@russ many thx