Attachment : IMG_20210617_141820089.jpg Just received my copy today.. it is SO expensive now, especially since brexit

If you're okay with it @rocknroller912 then chunky is good. I like it chunky. The problem is that chunky means something different to everyone. I suppose, the best way to find out is to let several ...

I’ve been searching my scrap pile for bits to make the body on my practice build and came up with these. Philippine Mahogany on the outside and an old bit of Mahogany window frame in the middle, all p...

@rocknroller912 all down to personal preference I guess, personally love a neck to be super thin but know people who love and hate either extreme.

@russ I didn’t word my post very well and what I meant to say was that I’m ok with someone telling me it’s not good enough yet

If you're okay with it @rocknroller912 then chunky is good. I like it chunky. 🙏🙂🎶🎸

Still a bit more to remove from the back profile. I was waiting to get an opinion from someone who plays electric. It’s still too chunky apparently which I’m ok with, good to get feedback as you go al...

@cheesewhisk How far should we twist his ear @mattbeels and I have to say I didn’t feel like fresh air this morning after last nights session on Guinness and Morgan’s Spice rum.

I thought it was bloody funny, still do. You guys are a breath of fresh air.

@cheesewhisk Looks like you’ve nailed it

🤣 🤣 🤣 🤣 🤣

*cough Attachment : mattbeels.JPG

After a few failed neck pocket template attempts, I made an adjustable jig for making the pocket template from based on a design posted previously on the forum then used that to route the template: ...

Side dots all done, 1.5mmx1.5mm MOP, most awkward part of the build yet. I’ve drilled one of the holes for the 24th marker out of line, thought it was just a little out when I did the hole but with th...

@robin no I masked off the fret wire and sanded with the grain. I’ll do a small test with some lemon oil to see if it magically vanishes and if not I’ll redo them all the same. I suspect the same as y...

@tej . I’ve managed to clean it up fairly well but now the wood is lighter on two frets where I’ve sanded and scraped. Were you sanding across the grain to get close in to the fret wire. Try sanding...

@koendb Thanks. It will definitely improve as I’ll clean up the whole board at the end which will leave a much more uniform look too if nothing else. I suspect the lighter colour is tiny particles of ...

things had been going so well it was a little disheartening! Yeah I know that feeling all too well :-/You might be able to get rid of it by sanding with very fine wet n dry.Eventually, even if you do...

@koendb I was careless filling the fret ends and on two of the frets the glue ran over the front of the board. I’ve managed to clean it up fairly well but now the wood is lighter on two frets where I’...

Superglue + fretboard = sadness What happened?