Attachment : VID_20651204_080621_065.mp4 Slapping on EVO Gold frets

My first build is a CrasterCaster - named after a small fishing village in my home county of Northumberland, and it's meant to look as though it's been made form an old barrel or fish box. @steadda H...

@steadda. Great first build Dave. I'd reduce the thickness of the body by the thickness of the Cap. It would be one chunky guitar otherwise and quite heavy.........but I guess it is all down to prefer...

@steadda well your first build looks great, sadly I don’t have enough experience to offer advice on your thickness query. I’d be inclined to say it’s personal preference if you’re making it chambered ...

Hi everyone. I stumbled across Mark's live 'Lockdown Lucy' streams during lock down in 2019, and I took his challenge when he said anyone who can draw a straight line can build a guitar. and...... ba...

Did a little bit more on this neck today. Drilled the tuner holes and rough cut the headstock. Installed the truss rod and glued the fillet in. Test fitted a couple of tuners and had to put the neck b...

I have all the original paperwork to prove it’s legally sourced. Also there more in the loft. @rocknroller912 Good stuff, I’m impressed. 👍

@boo I got some supplies when they were on offer. Wait till firms want to unload stuff. I think the rosewood was £6 each ten years ago and the Ebony was £10 two years ago. I like to spread my investme...

Now the big question - ebony or rosewood fretboard. @rocknroller912 Are you opening a new supply shop? 😳🤩

@tej That might be a bit hard but I do have an ebony plank I got from David Dyke suppliers a while ago, not sure if ebony is good for laminating it might better just for fretboards.

Now the big question - ebony or rosewood fretboard. Laminated combination 😉

Now the big question - ebony or rosewood fretboard. Attachment : C26CE3FC-F6AF-4A8A-ADB8-4EE6625E1F42.jpeg Do you think I’ve got to many ?

@tej I didn’t think of checking the web it’s too much like being back at work

@rocknroller912 can’t see why you’d need to as it’s not going to be pushing on any wood. I can’t find any examples on the internet where anyone’s taken a fillet that far either. Apprécie though I don’...

Questions for the experienced electric builders please on my practice run before going to the wood I got from Mark. Do I need to glue a fillet in to the last gap where the adjusting nut shows. I’ve on...

This is My Favourite Song For This Moment......dance around your kitchen 🙏🎶🙂🎸

Two great choices @rashdown_online & @louis-kerckhove. 🎸🙂🎶🙏

Another great one from back in the day. Louis

Recently, I've been listening to this (again)... One Tree Hill

Been enjoying this today