Lasertastic! @nsj 🙌🏻 🎶🎸🙏🙂

@nsj Nice work Neil. I'm going to look into getting one of those radian surfacing bits. 👍 🎶🙂🎸🙏

So after a long winter break I've returned to my little shed to work a little on the bass again. Routed the neck pocket and drilled some holes. Attachment : IMG_9559.jpg Attachment : IMG_95...

Attachment : 171FDBD9-EEB8-4988-AB82-ACF438C425B6.jpeg Attachment : AE38A54C-78E8-472F-90A4-6D686E91DA88.jpeg Attachment : C3104D01-0F20-403A-A004-3A8313ADC62A.jpeg Trying something ...

@nsj Got solar panels installed last summer. In my area we have the first really snowy winter in years, so virtually no production at the moment. No fun! But it sure is nice when the white stuff is go...

@nsj I’m getting used to the weight of it, maybe I’m building up my muscles!!🤣🤣 Not sure that my good lady would be too chuffed with me building 19 guitars, future projects may need to...

Hi Everyone, Must say I’m as proud as punch today having finished my first attempt at building an electric guitar from scratch. Thanks to Mark’s fantastic course, I’m now the proud owner of a guitar t...

Although I happy with the good close glue join that I've got between the sides and soundboard/back, it just doesn't look finished without binding. Having said that, I'm reluctant to set about it with ...

Fretboard levelled and dots added now. I went to get my dots out of my bag of bits for this build, and realised that I hadn't bought any. So I cut some 6mm plugs from a piece of maple an used that. Al...

Hi - I've just done some tests with pine. Firstly I used 18mm pine with a variety of settings, but it was having none of it. I then used 8mm pine which cut pretty well with the following settings: ...

@nsj. Nice work Neil. 🎸🙂🎶🙏

@nsj Wow!! Looks great, especially the blue resin contrasting with the light colour of the wood. Great work there.👍😃🎸

I shaped the soundboard seam diamonds today and glued them in. I also put them along the repaired crack in the soundboard, it might affect the sound qualities, but I doubt if I'll notice it. Attach...

I've trimmed the back braces to length and notched the kerf lining and got the back fitting fairly good. I've dry clamped it with the 6 metres of rubber band that I've cut from an old inner tube, it's...

The back kerf lining is on now. Merry xmas to you all. Attachment : 20231224_175645.jpg

Happy new year, folks! As I've bored you with the earlier parts, I may as well show the final product 🤷 Fully shielded and finished off with a bone nut, gotoh tuners and a set of Seymour Dunca...

@nsj It is a 24W diode. For cutting, a CO2 laser would be a better alternative, but they are quite expensive and bulky. I can indeed cut through both MDF and plywood, but anything more than 3mm requir...

I got me a diode laser engraver recently. I was hoping it would be powerful enough to cut out routing patterns/guides as well as engrave, but I have not been successful in cutting thick enough materia...

Made my kerf linings now, I think the the flat sawn strips are more flexible than the quarter sawn I used when making my jig. Dry clamped the trickier side of the front, looking okay. Attachment : ...

Sanded the kerfed edge of one side while the glue on the other side was drying. I found it far too flexible to hold it in shape out of the mold, so clamped it into the mold, so much easier. Attachm...