Liked Forum Posts
|
Whatever Happened to the Likely Lads? Attachment : image.png Where's my virtual friend @Marcel? Or Mr @Deej I presume "the authorities" finally caught up with @Boo again - out in 5 years? Is @MattBeels still working on his soft furn... |
In forum Pluckers Paradise |
4 years ago |
|
To embarrass myself into finishing something ... .. if I post it here, then I'll have to finish it! I've been swamped with work over the past few months, just no time for doing anything else. But hopefully I'm through the worst of that now, and I ... |
In forum Electric |
4 years ago |
|
RE: Grain filler for a mahogany type of wood @kevin-turvey I think it will work. I’ve used sanding sealer over Danish oil, but from what you describe using oil as a filler probably isn’t necessary. From memory Liberon sanding sealer is quite th... |
In forum Finishing |
4 years ago |
|
RE: Grain filler for a mahogany type of wood My intention was to cover the filled surface with 1 coat of LIBERON sanding sealer, sand then stain followed by several coats of sanding sealer sanding in between, then spray with tinted nitro followe... |
In forum Finishing |
4 years ago |
|
RE: Gouged Neck and thickness tolerance question? @jozefbehr This is a great community, Jozef...any question can be addressed with good advice, because we're all on this amazing journey together..most of these guys are already experienced builders. ... |
In forum New Members |
4 years ago |
|
RE: Gouged Neck and thickness tolerance question? Thank you guys for sharing the awesome information , i'm not aware with this , it is really helpful.. |
In forum New Members |
4 years ago |
|
RE: Gouged Neck and thickness tolerance question? Thanks Mark...much appreciated... moving along...like a herd 'a turtles This project is helping me adjust to retirement, so even the small frustration is good,,, <>< Poco7 |
In forum New Members |
4 years ago |
|
RE: Grain filler for a mahogany type of wood @kevin-turvey I should have explained better. After a few coats of oil I wet sand with oil and abrasive paper along the grain and let it dry. Then I wet sand with water making sure to keep the water ... |
In forum Finishing |
4 years ago |
|
RE: Grain filler for a mahogany type of wood What sort of finish are you aiming for? I'm *guessing* that grain filling using an oil wouldn't work too well if you were then going to stain the guitar for example. |
In forum Finishing |
4 years ago |
|
RE: Hello from Perth, Scotland I'll just add my welcome to the queue! And I'm always impressed by people who build acoustics. To my mind, that's *proper* craftsmanship. 👍 |
In forum New Members |
4 years ago |
|
RE: Hello from Perth, Scotland @rocknroller912 Yeah possibly, when I got the slab of olive wood it looked great, left it for months before milling it down for bookmatching. Thats when I noticed issues. I guess the problems of buyin... |
In forum New Members |
4 years ago |
|
RE: Site Updates: Blue is New, Like button moved - World Peace Ensues... Posted by: @russ but is it possible to put it at the bottom of each post as I need to scroll back up to click on it after reading the text @markbailey Just realised that it's only a problem on my mo... |
4 years ago | |
|
RE: Grain filler for a mahogany type of wood Thank you for that tip I have some Rustins worktop oil which I think is similar to danish oil so I will try that on a scrap piece of similar wood. I assume it going to take a long time to cure. Do you... |
In forum Finishing |
4 years ago |
|
RE: Grain filler for a mahogany type of wood Posted by: @kevin-turvey Can anybody recommend a brand of inexpensive pore or grain filler for a mahogany like wood available here in the uk? Danish Oil works well as a grain filler on Mahogany type... |
In forum Finishing |
4 years ago |
|
RE: Hello from Perth, Scotland @norriemac It might have been badly dried causing cracks. Was the olive wood hard to glue. |
In forum New Members |
4 years ago |
|
RE: Hello from Perth, Scotland @norriemac Nice work Norrie. Looking forward to seeing this one develop. 🙏🎶🎸🙂 |
In forum New Members |
4 years ago |
|
RE: Hello from Perth, Scotland @rocknroller912 Thanks Mate, yeah I think that now too. I now know to never use olive wood again. Hidden cracks and defects that have taken hours to tidy up.haha |
In forum New Members |
4 years ago |
|
RE: Hello from Perth, Scotland @markbailey Cheers Mark, aye the website is great. Thank you. |
In forum New Members |
4 years ago |
|
RE: Hello from Perth, Scotland @norriemac Your guitar looks good and very ambitious for a first build |
In forum New Members |
4 years ago |
|
RE: Hello from Perth, Scotland Glad to have you here Norrie - hope you enjoy the site! |
In forum New Members |
4 years ago |