LOADING...
Skip to toolbar

Liked Forum Posts

Hello from Perth, Scotland

Attachment : 20220802_183017.jpg Attachment : 20220822_144114.jpg Ive been doing a wee bit of woodwork for fun like cabinets, jigs/tools etc for the last two years, which then took me down ...

In forum New Members

4 years ago
RE: Site Updates: Blue is New, Like button moved - World Peace Ensues...

@markbailey. Hi Mark, I like the wee thumbs up 👍 but is it possible to put it at the bottom of each post as I need to scroll back up to click on it after reading the text 🤔. No worries...

In forum Announcements from GuitarMaking.co.uk

4 years ago
Grain filler for a mahogany type of wood

Can anybody recommend a brand of inexpensive pore or grain filler for a mahogany like wood available here in the uk? In the USA they many exotic offerings, but here there is only Rustins or similar. I...

In forum Finishing

4 years ago
RE: Spam Alert! It's hitting the fan! ** UPDATE**

@robin Got it - cheers! Check latest announcement...

In forum Announcements from GuitarMaking.co.uk

4 years ago
Site Updates: Blue is New, Like button moved - World Peace Ensues...

Hey Folks - @robin and some others may have noticed some changes - yep the team have been busy updating the site and the like button has moved: Hope u like the new look - I think the blue text is a b...

In forum Announcements from GuitarMaking.co.uk

4 years ago
RE: Gouged Neck and thickness tolerance question?

Posted by: @poco7 Aghhh, the Blessed Learning Curve... Yep - that's what it's all about! I don't think it matters what glue you use but I would probably use wood glue to make sure it bonds OK to t...

In forum New Members

4 years ago
RE: Vacuum hold down parts

Posted by: @darrenking I have an 8’ x 4’ CNC router 😋 Good to see you're still here @darrenking. 🙂

In forum Guitar Building Tricks and Tips

4 years ago
RE: Gouged Neck and thickness tolerance question?

@markbailey @robin Awesome news...thanks, the dust 'fill' seems good...should i use super glue or tite bond? does it matter? I appreciate the good word...my slot is generally 12mm +/- as noted... I'm...

In forum New Members

4 years ago
RE: Gouged Neck and thickness tolerance question?

@robin thanks Robin ...OK, if I went that route, i can see the extra thickness under the truss rod...but, that would mean i would have to laminate my peghead as well, right? ...which means the dominos...

In forum New Members

4 years ago
RE: Gouged Neck and thickness tolerance question?

The neck is far from trashed - there's plenty of time for that later... After the neck is carved there is normally only about 3-4mm of wood left under the truss rod at the thinnest point: If the truss...

In forum New Members

4 years ago
Gouged Neck and thickness tolerance question?

Attachment : gougedNeck1.jpg I've gouged the neck, i think i will have to excavate it with a chisel and glue in a patch,,,sanding and scraping the whole surface after that..there are several scra...

In forum New Members

4 years ago
RE: Reduce weight of electric guitar

Posted by: @mario I have estimated a total of 3.70 Kg for the complete guitar (I don't know how the finishing can increase this weight). That's *not* super heavy. For me, "heavy" starts at around 4...

In forum Guitar Building Tricks and Tips

4 years ago
RE: Post your music..

Posted by: @marcel Last Saturday I didn't play with the "Akoestische Heeren" (Acoustic Gentlemen). One of our guitarists was on holiday. So what do you do then? You invite a drummer and turn into the...

In forum Pluckers Paradise

4 years ago
RE: What would you like to see next?

Posted by: @koendb Posted by: @russ wondering if you have any plans to do any more Live YouTube Workshop Wednesdays again. They were very helpful wee sessions and extremely entertaining. Missing t...

In forum Announcements from GuitarMaking.co.uk

4 years ago
RE: First scratch-build done!

That is. It certainly is! Congrats on the build - and for daring to be different :+1:

In forum Electric

4 years ago
RE: Vacuum hold down parts

@seanwhcraig Hi Sean, I have an 8’ x 4’ CNC router with a 360 m3 per hour vacuum pump hooked up to the hold down table. However, when machining such relatively small components as guitar necks or head...

In forum Guitar Building Tricks and Tips

4 years ago
RE: Guitar Build #3

Looks Fantastic , thanks for share..

In forum Acoustic

4 years ago
RE: Guitar Build #3

Excellent job! Beautiful grain on the back and very nice gloss finish.

In forum Acoustic

4 years ago
RE: Guitar #2 (Summer 2022 Project)

nice work, sounds very good too!

In forum Electric

4 years ago
RE: Guitar #2 (Summer 2022 Project)

@wayne_f Nice 👌 🙂🎸🎶🙏

In forum Electric

4 years ago
Page 158 / 939

Robin

Profile picture of Robin

@robin

Active 5 months, 1 week ago
Rep Points balance: 17,152
Hero Points balance: 237
Rank: Knight