Then I used the router and binding jig with a flush cut bit to trim the back and soundboard flush with the sides. Attachment : PXL_20230303_101356804.jpg Attachment : PXL_20230303_095651325...

Hey! Hey! @tv101. Nice job. Thanks for the link too. 🙂🎶🎸🙏

I was expecting a bang, or at the very least a FIZZZZZZ-POP @brie. This is the first time I've attempted anything like this. But, it was a painless and bangless experience! Have a look at ampmaker.c...

@tv101 Respect,sir!!👍😃 Often wondered if I should have a go at something like that, would probably end up with an awesome sound - most likely BANG!!🤣🤣👍

Thanks @clinton. I've long fancied doing an amp build. I was booked to do an amp-building course a few years ago, but C-19 arrived, so that course got cancelled. Then I found these kits (business is...

perhaps you can help me decide? should I make a normal control cavity then rout out the top half of the left body wing, or should I hollow out the entire thing? I still want an access plate on the bac...

the wings are glued on now, in the meantime I'm going to make some routing templates out of MDF whilst this is curing whilst listening to winger and drinking red bull. Attachment : wings glued on-...

I knew I was doing something wrong, no matter how much black paint I was spraying, I always ended up with a clear guitar body. and the weird thing is.. After a day painting, I always ended up with bla...

Ah I did buy these quick release thingies for my little compressor, it is super handy, I dont understand why they dont add these as a standard 🙂

Attachment : FullSizeRender.MOV Cavities

Next job was to shape the fretboard on the bandsaw and router. Attachment : image.png And then glued it on to the neck. Attachment : image.png Attachment : image.png Today I took...

Good to hear from you @boo. 🙂🙏🎸🎶

@tv101 The last set of Bare Knuckle pickups I bought cost me nearly £500. They only made 200 sets and the profits went to humanitarian aid for Ukraine. It was my way of helping out and I got some wond...

@clinton I’m so glad to hear you are ok, it all looks heartbreaking. Glad it’s not you but I still feel for all of those affected.

@tv101 definitely worth what is worth. Love em. I frequent and ordered a couple of times through their website.

*Another* excellent build and finish there Mr @clinton - congrats on that and whoever it's going to! Re the BKPs - they've become very expensive now. I remember buying them when they were ~£150/set, ...

Then I glued on the soundboard using the go-bar deck again. Attachment : PXL_20230302_120354103.jpg Attachment : PXL_20230302_121124041.jpg 🎶🎸🙏🙂

Then I marked out and cut out the notches to accommodate the braces of the soundboard. Attachment : PXL_20230224_115500427.jpg Attachment : PXL_20230224_115440900.jpg ......... Attach...

Next I cut out the notches in the kerfed lining to accommodate the back braces ready to glue on the back of the guitar. Attachment : PXL_20230209_142156708.jpg Then glued on the back using the ...

Then finished off using a sanding stick. Attachment : PXL_20221223_112230715.jpg Attachment : PXL_20221223_112239128.jpg ........ Attachment : PXL_20230202_134808725.jpg Attach...