Yeah I learned that the same way. In my case it was at the neck socket. Yeah. I almost cried. The fix? Well as some may recall, I grew up in an auto body shop so the fix was body filler. Not auto body...

Now, that’s an interesting idea! I’ll certainly have a play with that and let you know how it works out - thank you!

Due to taking the lady shopping today I didn't get a lot done. My binding showed up though and looks a pretty good match to my pickups. Also my new binding router kit from radian tools arrived for doi...

@swepri I find getting the drills to go exactly where you want them can be a bit of a fight lol. Small bits with the hand drill aren't so bad, you just tilt the drill to move things about when doing t...

Thank you for the suggestion about the neck depth. I had already cut the neck to depth, so that’s probably not going to go. I think I will take one of my reject fretboards and use the whole thing as ...

Thanks Koen - ever the source of sage advice 🤣

Got enough thickness to take the top of the neck down? Remember to include the fretboard thickness. Like if you want 21mm at the first and your board is 6mm then minimum neck thickness is 15mm and so ...

ooh yes, sometimes things go wrong all the time.. The trick is to learn to fix the issues, if you do that correctly, everything is easy 🤣

Hi all! I hope everyone is well 🙂 Flippin’ eck! Ok, I know I’m trying a few new things out on this one (bound fretboard, bolt on neck, Floyd Rose), but you’re supposed to try new things to learn, righ...

@kalimar old maple and mahogany floor boards make nice necks, just trim off the nail holes. For the body any hardwood will do really, just need to be mindful of the weight, Some woods are really heavy...

@nsj Very cool - and a great way to use all of your wood. I'm hoping to start finding old free tables to upcycle into guitars after I get a little more experience under my belt.

@kalimar Over as laminate, it's about 1.5mm thick or so but I like to match the face of the headstock to the body wood.

@nsj does that go over the headstock as a laminate or is the actual headstock? did you make a scarf joint for it?

This is our design, within the overarching plan of Mark's course Attachment : Design guitar V2 6.jpg

I often stick scraps together to make bigger pieces for cavity covers and headstock plates like this one. Attachment : 20230519_010153.jpg

I'm going to try and use a couple of pieces from this scrap for my neck angle jig. 🤠 Attachment : PXL_20230613_184456351.jpg

Getting started on the neck. Our maker space has lovely tools and they make wood dimensioning a joy. I'm using some quartersawn sapele, and a couple of passes on the jointer and planer make it feel al...

Did some of the cutting out of the inner horns and planed the fretboard sides to make room for binding, so far so good. Attachment : 20230612_170603.jpg Attachment : 20230612_170725.jpg

Cheers @nsj. Good to know. 🙂🙏🎸🎶

Little bit more work today, did the slot for the pickup wiring so when I rout out the pickup cavities the channel will appear. I cut a lot of excess off the neck to make it easier to deal with. And I ...