And finished, the blue resin is perfect too, nice and subtle. Gotoh hardware, warman pickups, coil split with a 2.2k resistor to keep the split fatter sounding. Attachment : 20230528_193508-01.j...

INTRODUCING THE LATEST MODEL FROM GLASSCOCK GUITARS!!!! Here’s the latest original guitar design from the Glasscock Guitars design studio. Meet Jester! Jester is a slim waisted double cut solid body ...

@swepri good idea! Thank you!

I would draw a full scale side view of the guitar, with the preferred bridge height and go from there to determine the neck angle.

Thanks NSJ, useful stuff. I guess once I've completed my first build the steps Mark provided above will make more sense. The bit I can't envisage yet is how to create the neck angle? Cheers Dan

100% do all the fretwork first! It's a pain where the sun don't shine trying to do the upper frets after lol. And a 100% don't forget the pickup wiring slot, I did on my 2nd one! Luckily it had a fl...

Hi, I'm making my first set neck and interested in doing a through neck next. Were videos or course content created for this, I can't see any in the current build an electric course (although I could ...

How to Make a Thru Neck Electric Guitar (I'm working on a video on this subject - thanks Herb for the suggestion!) While you are waiting for the edit - here is the nub of it... Making a thru neck guit...

So after 7 months, I finally found the time to finish this guitar...I removed all the hardware, sanded with 220 and 320, then applied Crimson High Build Finishing oil, using paper towels, followed by ...

Neck ready for fretboard. I’ll be using that ebony fretboard in the picture in my previous post in this thread. I’m doing a 14” radius on this one. My first was 16” radius, #2 was 12” radius. I want t...

So I’m starting build #3. Gonna try to do better at documenting this one. Heres where I am at the moment. Attachment : 75AE1D6C-F710-4751-81B3-CD07D4C5DC59.jpeg Attachment : FF66868E-3333-4...

@dav Trussrods do not need to be pretty! 🙂 Check for a snug fit and the function so it works both directions and that the slot for the hex key is ok.

@koendb Sure! The build I'm going for is a headless Ibanez Jem with a metal pickguard and 3 push&pull pots (hsh). I'll be sure to send pictures 🙂

@dav The most important thing is to enjoy what you are doing 🙂 Good luck on your build. Be sure to share your progress here on the forum. We all love pics and videos 🙂

@koendb thank you for your reply, I gave it some thought beforehand but in the end, for what I'm investing into the guitar that being mainly the hardware, wood and time itself, I chose to go ahead and...

I would definitely try to rescue the fretboard first and indeed fill it with glue and dust. Perhaps it is not a bad idea to figure out the correct placement for the frets and double check them. There...

@Robin @swepri, thank you very much for the links, I from France, so guitarsandwoods would prob work better for me, althouh how much does markbailey price for his fretboards? Thank you again

@dav Do you know where I could buy a blank from? Im looking for Maccasar Ebony blank if possible. I don't know what part of the world you are in, but here in the UK, I've bought mine from @markbai...

@dav I don't know which region you live in, but in Europe this is a place I usually buy stuff from: FRETBOARD BLANKS (guitarsandwoods.com)