Pulled all the masking off and it’s ready for clear coat. It all looks a bit flat and lifeless right now but it will all pop when the clear coat goes on. ✨✨✨✨✨ At...

Got some gold on but I used an extra bit of lining tape on one side of the gold areas, to keep it silver. Attachment : BB05D8C1-860C-44F6-A611-B019D04A83C6.jpeg Attachment : 936A4CB0-9C05-...

@rocknroller912 The Crazy Scotsman is a nutter, very amusing. 🏴󠁧󠁢󠁳󠁣󠁴󠁿🤣🤣🤣🤣

All masked up and ready for gold. 🥇✨✨✨✨🏆 I’ll do this bit with my airbrush, then unmask it and take it into my outdoor workshop for several coats of clear c...

I've dropped the bridge and set the truss rod but need to drop the nut now which should bring the action down nicely. I have noticed that I have a couple of niggly buzzes on the 13 and 14th frets on t...

@powerful Ahhh nice work man! That looks amazing.

Posted by: @powerful At last. Ready for strings and final setup etc. so here goes @powerful Nice one, give us a tune. 🤘😀🤘

At last. Ready for strings and final setup etc. so here goes Attachment : 8625F9D8-D8AD-4D60-A753-58B534D1F524.jpeg Attachment : A6A6B84A-C807-4CB4-B4C0-A7BF0742064F.jpeg Attachment :...

@koendb I tend to,leave my mistakes as it reminds me for next time.

@rocknroller912 Indeed , If I decide to add a layer of veneer, I will have to remove 0.5mm from the top anyway, since indeed, it would make the headstock too thick. I 'll leave everything as is for no...

@koendb Be careful with adding extra veneer at a later stage as you might find it’s too thick for the tuners to fit. Very thin veneer over the back will cover the plugged holes but it would need to b...

@koendb That is truly amazing work. 🙌

Today's work:Making a maple heel cap and do a lot of scraping and sanding to get the heel and neck in better shape. Attachment : IMG_20220206_113033693.jpg Attachment : IMG_20220206_1604583...

That does look very nice indeed @koendb 👍

@koendb Woohaaa, brilliant!

My favourite song today:

@boo Screen shot only but you should find it from this Attachment : 6A76ACDF-66E1-4591-84D9-70AD9997E8FD.png

I put my logo and tuners on.Not a huge success to be honest. First of all, there where some air bubbles left underneath the waterslide decals, which I did not see until after I clearcoated 🙄 ...

Posted by: @tv101 I’ve taken a week off work so I might get this guitar halfway built @tv101 I thought you had retired? It’s much more fun building guitars every day. 💪😁🎸

I’ve taken a week off work so I might get this guitar halfway built