no allowance is made for this with standard parallel fret positions. @darrenking There's no allowance to make in that case. draw out a rectangular representing a neck (from bridge to nut) with parall...

that you have to include the string angle into your calculations I think that the differences caused by small variations in nut/fretboard/bridge widths aren’t going to matter. I mean, no allowance is...

I'm going to have to draw it out, but it seems to me that an issue with fan frets may be that you have to include the string angle into your calculations, at least for the outside ones (the ones in be...

as it angles the fretboard rather than the saw Yup, definitely the most sensible and easiest way to go. I’ve had an idea on how to adjust for the different ‘square fret’ but I need to draw it before ...

@darrenking You're correct that there is no standard for which is the right angle fret. Strandberg seem to make it the zero fret, but they don't have a big difference in scales (just 1/2 inch between ...

I’ve just watched this video and I’m sorry, but there is no way that this method would be anywhere near as accurate as simply measuring each fret position from the nut. Every time he measures the next...

A universal, adjustable fan fret jig is almost impossible. There are just sooooo many variables not least of which is deciding the fret that is square to the centreline of the fret board. This affects...

CrystaLac Brite Tone. I know a lot of American guitar builders use this as a top coat and finish for their instruments, and for a long time we haven't been able to get it in the UK, well thats all cha...

Shouldn’t imagine an edit button 🤣

Attachment : 838C5A0F-36CC-4301-A7EB-9C76EBF3E713.jpeg

So your saying I probably should leave my nitro finished jazzmaster in the conservatory? Serioulsy though, I used some rattle cans of nitro from northwest guitars. Obviously well ventilated and using...

I sprayed it using a cheap spray gun that came with my cheapish compressor. Seemed to work fine, easier than brushing and better spray than rattle cans. I have used nitro in the past and I always dam...

@chrisot Thanks. Other than the mask/ventilation thing, any other advice?

It looks really good to me @chrisot. Did you spray or brush it on?

The picture attached to my post shows guitar that I stained using water based stain from Crimson guitars. I've also used it on an acoustic and again it was pretty easy to work with although not very n...

@chrisot I've got the starter pack of Rustins for my finish experiments (I'm going to be trying different topcoats, stain, sealer and filler combinations on small test pieces, so I think the small qua...

I have recently taken to using Rustins Plastic Coat which is a two part. Can be brushed on or sprayed. Applying several thin coats about an hour apart and then ready for polishing after about two days...

@rocknroller912 I would love to do that sometimes.

@koendb Its hard to chat on the web without getting comments and people mixed up, maybe we should organise a zoom meeting or something.

I wouldn’t call it a correction your point of view is just as valid as mine Oh @rocknroller912, my comment was not meant as a correction to any other opinion either! I think you are 100% correct abou...