Sneaked in a few non guitars things as well hoping I don't get booted out. @rocknroller912 It’s fine, it’s all stringed instruments. Nice work. 👍

Attachment : image.jpeg\ Attachment : image.jpeg\

I don't have all my builds in one place as some of them were made for other people, but here's a few pics. Attachment : image.jpeg\ Attachment : image.jpeg\ Attachment : image.jpeg\ ...

@robin Yes I do like to stir the pot

@e-den-hertog I think there will be plenty of pubs for sale going very cheap

I'm afraid so................

@robin Haha good one!

@94dodgedude I took off a little too much meat though, so I'll have to go back and deepen my truss rod channel We've all been there and there's always a fix, (apart from the rare occasion that its ...

I forgot to mention, my neck blanks are each a little under 3" and I havent cut anything out on the back side so there is plenty of waste to put those bolts into if I make that jig. @robin your jig lo...

So I made the jig today for cutting my truss rod slot. It turned out well. I drilled some small holes in the side of the neck to screw the bolts into and it worked very well. Attachment : 20201207...

Great advice from Mr @Boo too - I like this "here's a custom video to explain something" approach - nice work sir! @tv101 Thanks Tony, sometimes I find it easier to have audio/visual explanation rath...

So right at the end of todays stream, Mark, you were holding a strip of wood above the trussrod slot saying this would be glued in underneath the fretboard. The first thing I thought was of glue fouli...

@boo - yep! I could have cut a piece of wood to fill the gap between the router and the workpiece...would have the same effect but wasn't needed in this case...

I'm a bit peeved that I've not been able to watch live for the past two livestreams but I'm all caught up now. So right at the end of todays stream, Mark, you were holding a strip of wood above the tr...

Last time I mentioned it has come to my attention that folks are often doing things in the wrong order which can lead to avoidable difficulties. I also fessed up that I made the same mistake on a rece...

COOL! Getting your workpiece flat and straight is half the battle - use whatever you have available 😎

Attachment : 20201207_175629.jpg

I know from a recent live stream that Mark isn't a huge fan of the safe T planer (despite it coming from StewMac 😜) but I've had one sitting in the shed unused for a couple of years. I've deci...

Apparently I had been sneaky. @robin 🤣🤣🤣🤣🤣🤣🤣

@peebee Mrs ordered me a Bailey Electric Guitar kit last night too! Your Mrs must be a good one. My Mrs just recently found out that I have a Bailey's electric kit in my garage waiting to get starte...