@marcel Hi Marcel, Always liked a bit of Madness even in my Hard Rock days. Good time guys. 🎶🙂🎸🙏

Another classical tune (with a modern choreography) is my favourite song today.

I do solemnly swear it never will be. Neck blank and fretboard ordered now too but wasn't sure what the different truss rod lengths were for 440 or 460 for a 25 inch scale length

I never want to see it that tidy again!

It's 10x8 I think but there's a ton of junk piled up out of shot

Posted by: @ I'm talking nonsense.... my shed is even smaller at 6'x8' 😕

Posted by: @ Hi Gareth, Looks good. How big is your shed? I've got a wee 8'x10' shed which looks a bit tight stuffed with a lawnmower etc. Cheers, Russ 🙏🎸🙂🎶

I've been thinking about this for a few years and finally took the plunge, sought out and bought what thought I needed to get going and also cleaned a space in the shed. There's still a whole bunch of...

So could one use syooper glue and wotsit tape instead?

@james-chacewatergmail-com-2 So could one use syooper glue and wotsit tape instead? I've gotten the impression that superglue and wotsit tape is frowned upon.

@james-chacewatergmail-com-2 I'll keep you posted with the next cock up I thought that I was king of the router cock ups. Have a look at my "First Practice Bulid" post, you'll find all my learning o...

Some fine maple sawdust and glue, mixed together into a smooth paste Christy TV! That sawdust and glue trick on your hole (Fnarr Fnarr) is invisible! Is there a recipe for the mix or is it just pure ...

I'm new to the site, but have a couple of builds on the go... have made several mistakes on the way, on previous builds, and these ones, but have been able to recover. Building necks are the bane of m...

Hi Jaxty, you're doing well there. I used a Bailyley pre slotted and radiused fretboard for mr first build, and iv'e got another one for my next build. What do you use to radius your fretboards?

@robin Thanks! Feels like good progress! I have a radius sanding block that I will use. Most certainly, a pre-slotted board would have saved me some time and a lot of effort! I just needed to be ...

@robin I am somewhat lucky that I have a local source (within 50km) that has body blanks, neck blanks and fingerboard blanks available. I will eventually get back to purchasing pre-made, however, as ...

@jaxty I just needed to be able to do this myself I like to do things for myself too and I've really enjoyed make jigs and tools. But for fretboards, I don't have any suitable wood to make blanks f...

Oh yeah.... when you said 'roundover' my mind automatically jumped to roundover bit. It's not radiused yet, so perhaps it won't notice so much once finished and fitted..... I'll keep you posted with t...

Cheers TV... so I fix my dodgy routing with some more, er..... routing? What could possibly go wrong? 🤣

Well, I also made some kerfing planes in different width kerf sizes. 1/2, 1/4, 1/8 inch. This one is the 1/8 inch. You score a line with a 1/2 inch depth all tge way around the board and it sets a gui...