Impressive @darrenking. 👍😁 🙏🎶🙂🎸

Or a piece of tape even!

Please put one on "my pile" Darren. Will do TV. Anyway, I thought I should probably make sure this thing actually works before I go selling them to all my forum friends! The first thing I did was to ...

Great Song @tv101. 🙂🎶🙏🎸

Well thank you @russ for breaking ranks and letting the cat out, so to speak! @darrenking. Cheers Darren. I like watching but don't think I'll ever be performing. I admire @tv101 & @jamesbisset ...

Had not heard of Acoustic Bliss before and have added it to my watch list. The Twa Dugs didn’t exist when I lived in Ayr so I checked Mr Google. Looks like it’s Burns Statue Square near the A&G. O...

I caught a wee glimpse of you both on Acoustic Bliss last night. Well thank you @russ for breaking ranks and letting the cat out, so to speak!

@tej So this sounds like a great idea in theory as one thing I don't want to do is put a lot of effort to ultimately make something that's really silimar to something I already have. You can build t...

I would advise, for your first build, using all the parts that Mark uses for the set neck Bailey Bandsman @boo So this sounds like a great idea in theory as one thing I don't want to do is put a lot ...

You don't have to use both bearings at once @rockpile99 There's the me feeling stupid bit 🙂 I'll absolutely be making a template though they'll be worthwhile. As for the main routing bit I was planni...

PS - if you're not following a template for your body shape and just carving/sanding after cutting roughly to shape, then you probably don't really need the edge trimming cutter.

It confused me too to begin with 😀 You don't have to use both bearings at once - use whichever best suits the job you're doing and where you have the template. Here's how I do it (the more ex...

@rockpile99 thanks for the breakdown, I’m in a similar place, I’ve only ever used routers for cutting square channels and messing about to no end with round over edge bits. I’m clearly missing somethi...

I started out with (as it was capable of trimming bodies and necks in one pass but you could use a shorter cutter and do a few passes). For cavities I first bought and finished the tighter corners b...

@rockpile99 thanks, so which bits have you actually used then at what size, there are 5 from the guide notes with the round over being optional? Sadly limited to a work mate so good to know I’ll be go...

I bought Radian based on a recommendation but they're certainly well made, very sharp, and spare parts like bearings are available. I didn't buy a straight cutter (as a 6mm one came with the router) b...

good quality router bits from Radian Tools @rockpile99 interesting you mention Radian Tools, as I was looking at router bits today as mine are all dirt cheap and won’t do for fine work. Obviously the...

@tej Yeah, @darrenking is correct. You must use your judgment about which cutter to use, depending on which truss rod you use. If the truss rod is 11mm, use and 11mm cutter. If the truss rod is 6mm, u...

Hi Tej Welcome to the most friendly and helpful forum (for any topic) on the internet. Just to echo what others have said - keep it simple for your first one as it's certainly not as easy as the video...

@tej Making your guitar with 24 frets is no problem even with a bolt on neck. When doing a set neck you can decide where to place the neck on the body with regards to fret access, watching the course ...