It confused me too to begin with 😀 You don't have to use both bearings at once - use whichever best suits the job you're doing and where you have the template. Here's how I do it (the more ex...

@rockpile99 thanks for the breakdown, I’m in a similar place, I’ve only ever used routers for cutting square channels and messing about to no end with round over edge bits. I’m clearly missing somethi...

I started out with (as it was capable of trimming bodies and necks in one pass but you could use a shorter cutter and do a few passes). For cavities I first bought and finished the tighter corners b...

@rockpile99 thanks, so which bits have you actually used then at what size, there are 5 from the guide notes with the round over being optional? Sadly limited to a work mate so good to know I’ll be go...

I bought Radian based on a recommendation but they're certainly well made, very sharp, and spare parts like bearings are available. I didn't buy a straight cutter (as a 6mm one came with the router) b...

good quality router bits from Radian Tools @rockpile99 interesting you mention Radian Tools, as I was looking at router bits today as mine are all dirt cheap and won’t do for fine work. Obviously the...

@tej Yeah, @darrenking is correct. You must use your judgment about which cutter to use, depending on which truss rod you use. If the truss rod is 11mm, use and 11mm cutter. If the truss rod is 6mm, u...

Hi Tej Welcome to the most friendly and helpful forum (for any topic) on the internet. Just to echo what others have said - keep it simple for your first one as it's certainly not as easy as the video...

@tej Making your guitar with 24 frets is no problem even with a bolt on neck. When doing a set neck you can decide where to place the neck on the body with regards to fret access, watching the course ...

@mattbeels Thanks, I concluded earlier that watching the course is now the next step so indeed this should become more clear, good to know it's not something to shy away from though 🙂 As for tonal dif...

That's a nice piece of modern Dutch culture Well 51 years ago maybe it was...

Here is my favourite offering for today, great song, great album. 🖤

My favourite song today. The dancing at the intro riddles me.

That rosette's a good job well done @steveadams. I'll have to do it sometime, how many times did you practice it.

Didn't get to play the guitar after all .... I get that a lot lately :-/

How come this is the first mention I have ever seen of 'Acoustic Bliss' in the forum? I had no idea it even existed! Got it on right now and its bloody awesome, very impressed!

How come this is the first mention I have ever seen of 'Acoustic Bliss' in the forum? I had no idea it even existed! Indeed! I just subscribed now. Have to wait until tonight or tomorrow to watch , I...

I'm sure there's an idea for a movie in there....... ........"When Tony met Sally" 😁 🎸🙏🎶🙂

This is My Favourite Song For This Moment..... just love the energy. 🙂🎶🙏🎸

This is My Favourite Song For This Moment...... another band who didn't quite hit their potential. 🎸🙂🎶🙏