@liebe Thanks Dan, the unit was getting power from the battery, the tuner was working (therefore receiving a signal from the pickup) but the output fr...

Done!👍😃I hope your friend surpasses his target and can do the repairs that are needed, I know from my own experience how it feels to h...

Well, that went well👍😃 I solved the bridge pin problem by pulling the pin out as far as it would come, then cut it with my fret end ni...

Hi and Welcome!! If you’ve paid for Premium Membership, then you should have unrestricted access to all the courses. Enjoy your guitar building jour...

Nice work Stephen, of course you’ll have to do another😂 it is addictive after all🤣🤣🎸👍

@nsj Sounds like a lot of work but very satisfying, I'm sure, especially when you see the finished article👍🎸

@nsj Another masterpiece Neil, love the way the wood and resin in the centre carries on through the pickup covers, how did you manage that?👌&#...

@andyorton2gmail-com Great fun aint it!! Keep up the good work👍😁🎸

@nsj Thanks Neil, very tidy installation👍😊🎸

Hi Andy and welcome to the Forums, sounds like you're keen to get started with your first build. Great advice always available here and Mark's videos ...

Stunning as usual Neil and very unusual. Especially like the way the bridge is mounted, have you got any more detailed shots of that please.😊&...

@jonhodgson Every day is a schoolday as they say and never truer than when making a guitar!!😂 Enjoy the rest of your build.👍😊...

Well done @cooperman and of course we'd like to see the first one you did please. 👍😊🎸

Next, I levelled the frets, recrowned, polished and dressed the ends. Then I applied Liberon finishing oil to the neck (6 coats) and the top of the bo...

And so the fun begins, neck stripped back to bare wood and headstock reshaped, top of body stripped back restained and sunburst applied. I did the sun...

@stephen-hayes Really like that walnut cap, straightforward and attractive👍 Nice one!!😊🎸

@jonhodgson Totally agree with Dan's comments and would just like to add that routing the headstock shape can be tricky, maybe better to cut close to ...

@scotty Wow that’s a tremendous amount of work but very worthwhile for the effect. I’ve seen something similar done on a smaller scale using pencils/c...