@albert1234 Okay thankyou for suggestion

Hi Julio, The top rated Tone wood used that affects the tone and resonance of an acoustic guitar . Tone wood character is a sign of good high performance. Tone woods effect sounds, tones, projection, ...

@julioherrera Hi Julio, This is part of Mark's design your guitar course. There's Wood 1 and Wood 2. You'll have to sign up to see it. 🙂🎸🎶🙏

@russ thank you for explaining it, sir! Can you place the online course link here in the comments?

@hennry1234 thank you for specifying it, can you tell me where are you from? Any good vendors from where I can purchase this wood?

Hi Julio, Maple is popular wood for acoustic guitar backs and sides. Sitka spruce wood for acoustic guitar tops. Mahogany wood for acoustic guitar.

@julioherrera Hi Julio, There are many woods that can be used for the back and sides of the guitar such as India rosewood, mahogany, walnut, maple any many others but the most common wood for soundboa...

Hello, my name is Julio Herrera Velutini from Italy. What type of wood should be used that affects the tone and resonance of an acoustic guitar?

@boo if it haqppens again just glue the neck in and glue the ferrules in then glue screw heads in 🤣 🤣

@nsj thanks, both good suggestions, although I tightened the trussrod to the point of creaking alarmingly to get it not quite straight. i do have a means of setting the neck the way you described; I j...

@steveh Trussrod fully tight and still bowing forward? You could try adding a bit of physical pressure to pull the neck back and see if the trussrod will turn more. Or, you could somehow pull down...

@russ thanks Russ - this one was quite challenging as I was breaking a lot of new ground for me.

Ugh, here’s a thing. The frets aren’t quite level, so I decided to revisit that. I can’t quite get the neck flat, even with no string tension. With the Trussrod at its tightest, I have the slightest a...

So, ladies and gents, I give you: „The Guitar that didn’t want to be Built“ as I know it affectionately Attachment : IMG_0043.jpeg Attachment : IMG_0044.jpeg Attachment : IMG_0045.jp...

When you say glue in, then strip it down and paint. You mean leave the neck in cuz we just glued it, right? so I would just remove hardware and the mask the hell out of the fretboard and other thing...

I got mine out of aldi years ago, still going strong. Came with the snake attachment too which helps when I drill those ferrules off centre lol I try and use a nice small bit to do pilot holes so th...

Quick question about the order of tasks.... In the lessons, Mark glues the neck and then applies the finish. But he's using a wipe on oil..... If I wanted to actually use paint as a finish, is that st...

Hey @Boo while I remember, got these from tool station, pretty cheap but can be pretty handy. There's a little dremmel sized one in the kit too. Attachment : 20220209_181511.jpg

I say old bean, get yourself a dremmel, there's a good chap what what 🤣

Thanks @boo. I'm sure we will eventually meet up one day. 🙂🎶🎸🙏