@somethingnicer ah good news! You could stay with 2 pickups and use a push pull as a pickup selector. But as you've gone back to your original plan, all good!

@liebe hey Dan, thanks a lot. I ended up plugging the hole and just going down to one pickup… this was my original plan to begin with so not worrie. I’ll just cover the pickup hole with a pick guard

Hi @somethingnicer, I'm presuming you've drilled the hole for the switch, but not routed out the cavity for the switch and that's what you're wanting to do next? You are pretty close to the edge. It'...

So if you remember my post about messing up my scale, I fixed that by altering the design of the body and cutting the top part (closest to the neck) off and making it look smooth. And it came out supe...

@tv101 hey, did you happen to go through with the ash neck in the end?

I've ruined a couple of bodies, a couple of necks and an almost finished build! But, I've learnt to get over stuff pretty quick these days and just get on with it lol.

Finally got this delivered to the owner. Attachment : IMG_1918.jpeg Attachment : IMG_1917.jpeg Attachment : IMG_1915.jpeg Attachment : IMG_1916.jpeg Attachment : IMG_19...

And here’s more pics Attachment : IMG_1664.jpeg Attachment : IMG_1597.jpeg Attachment : IMG_1602.jpeg Attachment : IMG_1745.jpeg Attachment : IMG_1747.jpeg Atta...

So thought I should update this and show y’all the pics I’ve taken since I began this build. The guy will be picking it up on July 4th around Noon EDT. Afterwards he will draw the winner for this year...

I’m getting close to being finished with a guitar for the winner of the drawing I had months ago. It is a copy of my 3rd design I named Maria after my wife yet using a variation of her middle name, Ma...

The others are right @somethingnicer, once you start carving and sanding the neck profile you won't see it...... It's all a learning experience..... now you are already a more experienced router user....

@somethingnicer Most of that will be removed when carving the neck too so don't worry to much. I doubt anyone will ever notice once the build is finished.

@robin Thats great. Thats what I was thinking and what I was hoping to hear. Thanks!

@somethingnicer Glue a shaving of wood into the recessed area, make it a good fit, and match the grain as best you can. Once you've sanded it down flush, I guarantee that no one else will notice it un...

Attachment : music-store.jpg 🎸🙏🙂🎶

Attachment : 08-out-of-tuna.jpg 🎶🙂🙏🎸

Hello Peeps, I've been watching this over again recently and I thought it would be nice to have a dedicated wee space for it here on the forum for you all to watch it...... Fantastic! 🙌Ἷ...

Good job sir!

The back is on, the neck is in, the finish applied, the bridge fitted. Now it’s time to tackle the wiring. Attachment : IMG_0366.jpeg To make sure I didn’t make any wires too short, or too long...

This Is My Favourite Song For This Moment..... Beautiful. 🥰 🎶🙂🙏🎸