Take measurements regularly (eg. with a vernier caliper) at the 4 corners and at the 12th fret left and right and keep checking if the board is flat with a straight edge. Takes time, but you should be...

Yes Gerard, welcome to the forum! En sommigen spreken gewoon Nederlands.............

And the Groovemeister....

😀 😀 never seen that one.........

I say John Entwhistle..........................

Sperzel locking tuners can be converted from right-handed to left in a jiffy.........

Evidence @E-den-hertog ? Not really... A faint suspicion............

What Boo said... You ba***rds....... 😉

Made some templates this weekend.... Attachment : 20201101_130843.jpg

C'mon.... leave the cuddly geezer alone.... He's only human.... 🤣 I'll stick up for you too Mark!!

Nice post! Very interesting..... Where did you get the stuff? I'd like to try it myself, but I haven't found a Dutch/European retailer yet....

I'll do my best.... 😆 😆

Thanks Mark! I guess you're right 😀 😀 A custom twist.... I'm thinking of routing out a small portion on the front lower side of the headstock, maybe inlay it with a contrasting piece ...

Attachment : 20201010_161638.jpg Hi all!! I am planning a new project, an ultimate superstrat! For this I nicked Marks Exotica design (I hope you're OK with this Mark; if not, let me know). I calc...

That was where I was, 13 years ago. @markbailey won't remember after all this time, but before I stepped inside his workshop, I couldn't saw a piece of wood in half without something going wrong. I ...

Well.... you're probably right. I think I'll put this one on hold until I run into something nice.....

I see your point(s).... I've done ash/alder with figured tops, but I want to try something else. Much like the Suhrs, Kramers and Jacksons of the eighties and nineties. Also, I don't have the right eq...

Glad to be of service!

I level the frets with a long piece of 18 mm mdf with a strip of 320 grit or 400 grit, depending on the amount of leveling that needs to be done. I take of the sharp corners with a small fret end file...

I'm thinking of an eighties-style metal-fusion guitar with a full (quilted/flamed) maple body and a purpleheart neck (why? Because I like purpleheart, that's why.....) with a pointy angled headstock (...