Got the neck pocket sorted, managede to rout a small angle in it too so I can keep the fretboard lower while still having enough height at the bridge. Also shaped the body at the pocket. Going to knoc...

Got the fret markers in, frets and side dots. Only then did I realise I'd put markers on the 25th fret instead of the 24th lol. I knew something was off when I was doing it too. Anyway I got on and ...

I've finally got myself back out to my shed too, also building a bass. Since we've had the heating installed I'm more reluctant to go out to the shed in crap weather lol

Started another bass guitar, friends kid bought the last one so I need another, obviously lol Brazillian mahogany with yew and resin top. Neck is maple with brazillian mahogany up the centre and som...

@somethingnicer I think that'll just be for the fatter end part, the main part of the rod will be a 1/4 inch. Personally I use a 1/4 inch for the full length including acces then I go over the thicker...

@brie if you're on a low enough income you can even get most of it done for free. Think it's somewhere about £19500 per year or that. Ours was all free, insulation, vaillant pump and solar. New modern...

@rathius sorry buddy, been busy and not on the forum but yes, super easy. Just rout the truss rod like usual but out the other end. Skunk stripe for one piece necks, fit the rod in from the rear. Mar...

@rathius I do all the fretwork etc first before gluing a neck in or attching wings with a neck through, so much easier lol. As for recessing, just sort your neck angle to suit whatever option you're g...

@rathius yes, you can do set neck, bolt on or neck through. Makes no odds at all. A lot are bolt on for convenience I expect. Just get your dimensions from the floyd makers site. From that you can alt...

@brie ours is an ancient old stone cottage too, the biggest thing to cost is insulation. An air source pump can heat any building but the better the insulation the more efficient it is.

@swepri get a brush on an extending pole lol

@boo first time in my life I've lived in a warm house, it's very weird. A lot cheaper though, was about £6 on leccy and £12 a day on coal and wood! Now I can have toasty house for anything from £4 to ...

@brie I've not managed to start another yet, just had all the air source heat pump, solar and insulation done so it's been mental! Now it's making shelving and stuff to move things around and get some...

What are you doing on here? Get back in the shed and start number 2! 🤣 Guitar looks good, weights fine. Anything lighter than a les paul is fine lol I started at the beginning of the whol...

And done, seperate bridge and neck volume with master tone, coil split and a para series on the bridge pickup. All gotoh hardware, warman pickups Attachment : 20240109_130301.jpg Attachmen...

@musicjohnmcculloch-net I should be able to do it in 4 passes seeing as my module is 12 watt I believe lol Are using air assist?

@swerpi, what wattage is your laser? It seems birch ply is a preferred material for cutting too, mdf is apparently to dense. A bit of air assist and multiple passes should work. My thinking is to mayb...

Well that's the body all sprayed, just got to finish the finish on the neck Attachment : 20231224_021949.jpg Attachment : 20231224_002440.jpg Attachment : 20231224_002449.jpg ...

I think your thinking way to much about this lol. Guitars are crude in terms of accuracy hence why some crazy people make them with weird wavy microtonal frets. It's free too, the idea is you print ...

Just thought I'd pop this in here for anyine looking, this place you can sort your layout then print it as a pdf template. Friend uses it for multiscale Other thing he uses is fretcalc android ap...