@steveh I usually go to p320 before applying finish. Before staining, I lightly moisture the surfaces and let it dry, to raise the grain. Then a light pass with p320 again before staining.

Hi everyone! I put together the Explorer-like in mock up …. Attachment : IMG_0033.jpeg Attachment : IMG_0034.jpeg Nothing is bolted down in the mock up, but I’ve subsequently checked an...

Nice work @boo. 🙂🎸🎶🙏

I managed to get my bench vice installed at the weekend. This thing is heavy, I'm so glad I build my bench well. I just need to make some big wooden jaws for it now. Attachment : IMG_20231217_10...

A little update - since the last update I've routed the pickups, did a load to the headstock, fitted the tuners, flattened, put a 16" radius in the fretboard, frets and levelled and fitted the fretboa...

Finally got the first coat of finish on the body, and added my mates logo to the back of the headstock. Chris Mckean Music Attachment : 20231218_015537 (1).jpg Attachment : 20231212_151430....

@nsj I was trying to go deeper than my router wanted to and I think the chuck released the bit and through it went! I may have sworn a bit. I would have considered a patch if I'd had any matching wood...

@liebe I went to deep once, measured from the lip for the cover rather than the back of the guitar lol. I used the template to draw the shape on a piece of wood, cut it etc then glued it in and the...

@robin Thanks I haven’t seen this before and only have his mandolin book. For a first build I would stick with Marks course and it will be a good guitar. Tap tuning is fairly advanced.

It certainly was not my intention to send you 'doon a wabbit 'ole'. I am sure that you will make a good sounding guitar whatever route you choose. After all, best results are based on guidance as well...

Well, I started giving updates of this build so I'm going to continue....! I've I managed to get all the binding glue out, fretting went well and no issues under cutting the fretwire for the binding. ...

@Rocknroller912 Thanks for your 3explanation. You describe what happens, I was attempting to describe why - so I gues we complemented each other in thid conversation 😀

@nsj thanks neil, I entered the scratch build category this year only JUST finished in time, I did a sound demo here

@tyreman what category did you do? I did the community but finished about 3 guitars ago lol Good job on the build, is there a sound demo coming up?

@rathius yeh I've been using those, I do a shallow recess in the top for them to push into so the nob can still sit flush at body height. But I wire all that point to point then just hook up the pi...

@nsj yeah I suppose if you’re only using regular pots but I use push/push these days. Did use push/pull but switched earlier this year. I do all the wiring on the pots before they ever get close to a ...

@rathius for joining wires but you're connecting wires to tabs, back of pots, side of switches etc. I'd use them to fix a car though lol

@tyreman. 👌Nice. 🙂🎶🙏🎸

@peter-c-f The sound waves on bowed and plucked instruments are different. I watched a science demo when I attended classes at violin school using transducer pick ups and an oscilloscope. For bowed i...

@robin violins are tuned F front and F# back