LOADING...
Skip to toolbar

Liked Forum Posts

RE: 7 String Advice

@whyte thanks, definitely something to look into, was aiming for 25.5” as that’s what I’m used to, and like, playing most. I had it in my head that some of the Ibanez 7 strings use 25.5 so I’ll have a...

In forum Guitar Building Tricks and Tips

5 years ago
RE: Accoustic kit ordered

@powerful. Those sides look great. When doing the first one you really have no idea of how far you need to bend to get it close. Watching Mark do it on the course, and when he gets it so close the fir...

In forum Acoustic

5 years ago
RE: Accoustic kit ordered

If those pics you posted were of the "near disastrous" first time that you've tried bending sides, and then the morning-after re-bend, then I think you put that down as a big success. OK, there's some...

In forum Acoustic

5 years ago
RE: Essential Tools and Precision Tools.

Posted by: @tv101 It's a bit cheeky really - "we only sell big chips, but you can also buy a saw to cut them smaller". @tv101 🤣🤣🤣🤣

In forum Guitar Building Tricks and Tips

5 years ago
RE: Essential Tools and Precision Tools.

Posted by: @robin Does anyone know what this gouge with the strange handle would have been used for I've no idea. Probably not something to have in your pocket when you're heading off to the pub tho...

In forum Guitar Building Tricks and Tips

5 years ago
RE: Essential Tools and Precision Tools.

Attachment : image.png Could you not just have bought a bag of smaller chips? It's a bit cheeky really - "we only sell big chips, but you can also buy a saw to cut them smaller".

In forum Guitar Building Tricks and Tips

5 years ago
RE: Essential Tools and Precision Tools.

Posted by: @russ Let us know how you get on with it @russ I will, it’s definitely sharp. But for how long?

In forum Guitar Building Tricks and Tips

5 years ago
RE: Essential Tools and Precision Tools.

Posted by: @boo don’t know how good or bad this saw will be but for £6.99 it’s definitely worth a punt. (29th October 2021) Let us know how you get on with it @boo. 🙂🙏🎶...

In forum Guitar Building Tricks and Tips

5 years ago
RE: My Shed

My extension cable is on a large reel and has a trip switch built into it. I would advise everyone to use one of these, especially when using power outside or when the cable is outside. Safety first.

In forum Guitar Building Tricks and Tips

5 years ago
RE: My Shed

Posted by: @russ Hi @robin, Have you ever run your cable out to your shed on a very wet day and have you found that it's safe enough? Or ... have you ever found that it's NOT safe enough??

In forum Guitar Building Tricks and Tips

5 years ago
RE: My Shed

Hi @robin, Have you ever run your cable out to your shed on a very wet day and have you found that it's safe enough? 🎸🎶🙏🙂

In forum Guitar Building Tricks and Tips

5 years ago
RE: Wolf's Descent into Madness

@wolframmalukker Very nice indeed, keep going. 👍

In forum Electric

5 years ago
RE: Nut Files

@tej I can’t remember my previous comment but you have thrown me a bit as I always work in mm, however I’ve got my head around inches after some thinking. The set I use is 0.4, 0.6, 0.8 and 1.0 mm. I...

In forum Guitar Building Tricks and Tips

5 years ago
RE: Essential Tools and Precision Tools.

Just been shopping to Lidl and came home with a bag of chips, a box of washers and a Japanese pull saw (double sided). I don’t know how good or bad this saw will be but for £6.99 it’s definitely worth...

In forum Guitar Building Tricks and Tips

5 years ago
RE: Accoustic kit ordered

@koendb firstly I had the iron too hot and ended up with scorch marks although these were mainly superficial and sanded out ok but my perception of where the bends should be were quite a way out and t...

In forum Acoustic

5 years ago
RE: Accoustic kit ordered

Nice @powerful ! what was it that made it almost disastrous ?

In forum Acoustic

5 years ago
Side bending

Hi. Took a massive leap of faith yesterday and bent the side’s with near disastrous results. However after sleeping on it and revisiting the job today I’ve managed to tease them close enough for the n...

In forum Acoustic

5 years ago
RE: Jigs, patterns, and lines on paper

@wayne_f For reference for drilling the routing holes through the body I used a 10mm argur bit with a drill that has a max unloaded speed of 1650RPM and 65NM of tourqe. Apprectiate you dind't have an ...

In forum Electric

5 years ago
RE: Momentum On Sarting Up

Posted by: @seanf I was wondering how will it be in the winter time for doing projects in the garage as it is just single skin. I may just have to layer up if I am full steam ahead on a project! @se...

In forum New Members

5 years ago
RE: Momentum On Sarting Up

@boo Great Ideas! I am certainly excited for the setup to come together, and I know someone who has stacks of pallets, so will be giving them a friendly visit 🙂 It would be great to do an indoor setu...

In forum New Members

5 years ago
Page 257 / 939

Robin

Profile picture of Robin

@robin

Active 5 months, 1 week ago
Rep Points balance: 17,152
Hero Points balance: 237
Rank: Knight