Unmask and it’s looking good. I love this Evo gold fret wire. Attachment : 53BE7D16-BF63-4A0B-9EDD-6BF339D5960C.jpeg

Felt level, crown and polish. Attachment : 070E02C1-168C-42B5-AB65-62AF19CC4259.jpeg Attachment : 08399C80-A44B-4BEA-B875-6C0404316FE8.jpeg Attachment : A39A3279-D55A-49AE-ACE6-227B...

Thanks @Russ - the complimentary feedback is genuinely appreciated. 😀 I shudder when I look back at some of my early contributions. But, if I hadn't done those, then I wouldn't be doing the...

Genuinely excited to see your finished guitar mate, well done Thanks @cheesewhisk! Come on man! just do it, Before I built my first guitars, I could hardly drill a hole in a wall 🙂

@koendb that looks incredible, I really need to pull my finger out and glue my neck in. Every time @markbailey says 'be careful not to...' that's always where I end up 🤣 🤣 Genuinely...

Hi @boo can I have some of your expert advice please. I'm up to 12 coats of laquer now and sanded with 1000 grit and got rid of all the tiny runs and ripples that I couldn't see before I sanded. Shou...

I'm up to 12 coats of laquer now and sanded with 1000 grit and got rid of all the tiny runs and ripples that I couldn't see before I sanded. Should I leave it at that for polishing or put a wet coat o...

We sent a drummer to buy some strings He went into the shop and ask the guy behind the counter The guy behind the counter says "You're a Drummer arent you?" "Yes" said the drummer "How do you know" "T...

A bit more refining and it’s starting to look good. Attachment : 5CA21597-0AC5-46C1-92DD-453FA8A66C36.jpeg Attachment : C7CBB503-F40C-498B-BF65-88EDC78F6609.jpeg Attachment : 98AAEE...

I used a variety of carving tools and got to work. Attachment : F5409F46-38AE-40CC-B2A3-359E5D3F48DF.jpeg Attachment : 09737430-960F-4DAC-994A-077ED98E394E.jpeg Attachment : 1E72B35...

I marked up the neck for carving to give me some guidance. Attachment : 4B193076-605F-4656-8E33-CB9CCB0CFDA4.jpeg Attachment : D5769071-B989-4C95-9F82-9FFF30FA1749.jpeg Attachment : ...

Attachment : 869A2793-CC83-4818-95F2-263FF9AA236E.png The Godfather of Guitars! I feel I may go all natural no stain on this.

@stephen Sorry Stephen, that was terribly dimwitted of me, I apologise.

Hi All, I've finally decided to take the plunge and connect with a community with an interest in guitar making! I've been playing guitar and bass (mostly bass) since I was a teenager, joined some ban...

Just pour it in will ya! OK 👍 Attachment : BAB0EFBA-6558-42BF-8843-CB9FD56E814E.jpeg Attachment : B16EE5E5-C807-411D-91D6-B3466E44AF51.jpeg Attachment : 3A54F4A8-7691-49C3-9...

Mixing some colours, blue and green. 💙🌎💚 Attachment : 536F8DED-0BBA-40F0-A520-3636CDA4EB7B.jpeg Attachment : 1A836BC2-7234-4264-ABB1-830A0C65DE55.jpeg Attachme...

Special masking tape to help contain the epoxy resin. Attachment : 9C03B6C0-E5B0-41DF-B705-F5C2D7A9DAC8.jpeg Attachment : D1A450E1-3583-4CD6-B606-CE5686630C8D.jpeg Attachment : A994...

Just got think link from a friend who is an industrial chemist @rocknroller912 Excellent, that’s new from NWG 👍

Thanks for the info very useful. The scaffold plank I have has bad warping across its width so I’m planning to cut it down the middle and join the outside edges together. I will need to add something ...

Help! I am in the process off spray Lacquer and this help, any advice. @dbell_1994 That is called “blooming”. It’s when you spray too much lacquer on at once and moisture from the atmosphere gets tra...