@tv101 Youre putting me to shame. I only have an iPad and haven’t managed to record anything. In my defence I will say that I left work to get away from spending all day on IT stuff.

@jamesbissett All your sets are great sounding and very well produced so if anyone is complaining about using an electric guitar I think that’s picky in the extreme

@clinton Good videos you make it look easy

This counts as a luthier joke cause there’s a guitar in the picture Attachment : DA43EF11-A0E5-4927-8FC6-0E2B47933DA1.jpeg

@frank1985 Looks very professional

@boo Another top job. I noticed you have a heady 14.3 deg temperature, hope you’re not expecting it to be as warm as that when you move North.

@cheesewhisk Your build is looking very good compared to the other ones in the photo

@wayne_f Getting the blanks flat and level is essential I think and it’s one of the hardest things to do, remembering that the fretboard will be glued to one of the faces. Surface routing is a good wa...

@jamesonguitar I think you’re doing ok so far and you’ve made a good video.

@clinton Great job

@tej Its possible to clean out the finish build up from post holes by running a sharp knife carefully round the inside. I know this sounds scary but the knife will take paint off without damaging the ...

@thepsth I can see both videos on an 8th generation mini iPad

@boo Thanks for the advice. I was worried about pulling the stain out as others have done.

@boo I think I will do an oil finish with Danish as it’s easy enough and I only spray when I have to. I was thinking of an antique stain on the neck and the same on the lighter body parts. My experien...

@electricstringtheorygmail-com I think it looks good as a complete picture taking in the headstock. It leans forward which is making a statement.

Scrap wood is starting to look like something. It was intended to be a practice before using the expensive wood but there’s no real disasters so far, so it may get strings. I’m trying to think of some...

@mikeyrjiom Thats a great looking guitar. The forum finishing expert is @boo however from my limited knowledge and experience nitro can be touched up without too much trouble. If the scratch has gone ...

@electricstringtheorygmail-com Thanks for the positive response. I would suggest measuring the distance of the top, middle and bottom bouts from the centre line, so that although it’s not a symmetrica...

@electricstringtheorygmail-com Welcome to the forum. I don’t think there’s anything wrong with a small body and a standard neck but I would agree that the proportions are not exact. Perhaps you could...

@robin Im getting video ok