@robin Thanks very much...appreciate your help.... cheers Steve

@clinton Just like @boo...brilliant and clear answer...really appreciate all of you taking the time and effort to help.... yes, I will be testing more than a couple of times on scrap!! Cheers Steve

@boo wow....perfect...thank you so much....totally answered my questions as I was also a bit confused between the hard edge of the bridge and the actual fixed saddle positions... I've fitted a few tel...

Hi Mark/Guys Not sure if you saw my direct message Mark, but I thought I would post here too.. I'm watching the video on aligning the bridge but I'm afraid I got a bit confused...I've attached a few i...

thanks.. I have ordered and put a note fofretboard spec as per your suggested spec on the fretboard page.. cheers Steve

Hi Mark/Carol I'm about to order the electric kit...can you just confirm where I let you know what scale length etc I would like for the fretboard etc? I can't see a field for this before I get to t...

@markbailey Hi Mark Thanks for the reply,...yes 7mm would be a bit crazy... It's frustrating but obviously a learning curve about these things as I tried to save money by buying a coil of fretwire but...

@tv1010101 Thanks for the comment....The idea of buying Mark's preslotted fretboard was for me to avoid cutting slots (at the moment anyway)...but i see your point...

Hi Deej Really appreciate your reply...I posted an earlier question getting some advice about the size of fretwire I used on my first neck as I was worried it may have been a bit small..the fretwire w...

Hi Mark I'm about to start fretting my neck which has your lovely rosewood fretboard on it. I wondered if you could confirm the width of the fret slots and what width tang you would reccommend for the...

Hi James Thanks for the reply...I'm on a learning curve and your thoughts really help...but also make me feel a bit releived.. I'll post some pics later as I've just finished polishng frets. cheers St...

Thanks so much for the reply and thoughts...I like your spin of highlighting low action etc...I may put slightly higher frets on the next one... Cheers Steve

Hi Guys Just looking for some advice/reassurance...I've just started fretting my first neck and am using stainless steel fretwire 2mm wide at crown and .9mm high....so far I'm pleased with progress, ...

Hi Bill really appreciate you taking the time to comment...I meant to say I cut it after the 22nd fret... I've attached a pic which shows the neck with the fretboard on it... cheers Steve Attachmen...

many thanks Mark yes scale length is correct..is for a telecaster, but good pount about marking bridge after... cheers Steve

Thanks for the reply Mark I'm making the neck and it's been cut from a cnc template so sizewise I'm starting with a standard neck... Yes, the bridge holes are done, again according to the template... ...

Hi Guys I have a quick question re my fretboards that arrived today. The fretboards look great and I had a quick question which may be nothing really but would love to hear your thoughts. I’ve at...