Don’t fret! I’ll do both of these today.

@clinton Thanks man. 🤘

Wowser! 🤩 I love Sam Fish’s music. 👏👏👏👏

I test fitted the tuners and it’s all looking good. It fits into the family nicely (although this one isn’t for me).

@frank1985 I just had to get that volute right. 😉

More refining today and I cut the headstock shape out.

@frank1985 Excellent, well done. 👍

No problem @robin if you spray lighter coats, it’s less likely that you will experience blooming too. It’s always best to wait for good conditions tho...

@darrenking Sound great Darren, I’m glad you got a warm feeling from this experience. I have yet to see one of my guitars get played in anger by the c...

@robin Right, what I would do is give it a couple more coats. Before you do, be aware that because you have flattened it (sanded it with 1000g), it is...

@frank1985 If you are determined to get it down to 14mm, route it in the jig you made rather than trying to sand it. It’s not only quicker but it will...

Alan, have you looked at the Finishing Course that Mark made on here? I highly recommend it to you.

@petersoyanov No problem. 👍 Good luck with the pickups, I’m sure one of the myriad of boutique pickup makers will be able to help you out. I bet it wo...

I thought you would like that @tv101 🤣

@petersoyanov I can get you to 57.5mm string spacing, how’s that? Schaller do some bridges that adjust the string spacing so have a look.

Right, before you spray anything else on, whether it’s sealer or lacquer, sand the whole thing with some 600g paper. Don’t spray anything over 2000g i...

@frank1985 That’s fine, I would leave it like that, don’t try and sand further into the headstock. The main thing is, it won’t affect the instrument f...

@clinton Be careful when sanding with a radius block. It’s easy to sand more off one side than the other or even sand a twist into the fretboard. In y...

Leave it as it is and carve it, it’s in the right place. 👍

@russ Thanks, that’s what she said. 😜