I have a plan!! And it looks a bit like this..... Attachment : Screen Shot 2021-04-06 at 14.23.21.png

Here are two amazing Canadian singer/songwriters that I first heard performing on the (very sadly) late Stuart McLean's Vinyl Cafe radio program. If you get a chance, try to track down Reid Jamies...

I love the contrast between the high gloss of the body and slightly sinister satin/matt black/dark purple of the neck. Very cool!

You are not the only one that needs to get a better fit with neck and pocket templates I have a plan!!

Fantastic job Boo, I'm very impressed. I'm interested to know how easy you found the buffer to use, how long it took you to buff the body with both compounds and how you would rate the result compared...

Pleased that you are enjoying some black nectar. Lovely drink! I’m off for kip now whilst the dogs can still be moved from my side of the bed. Give it another 30 minutes and their weight increase by a...

Hi Erik, That is a really beautiful lacewood body and a very lovely neck! I agree with Robin, what you have here are two lovely parts of two completely separate guitars, it’s just that they are never ...

It’s also down to where the main point of contact is. I would usually aim to have this below the centre line of the shaft, so spinning down makes sense. My grinding wheels spin away from me and take a...

Hi Rocknroller,Yes, I’m still up as well!! (It’s a holiday long weekend, I have no school tomorrow!) I think this is a matter of personal preference and practice. With the wheel spinning down in front...

Seriously, interested in trying this on an oiled finish. I think this would need a soft, dry buffing mop and you can’t mix compounds on the same wheel so it would need a mop dedicated to oil finish ...

It is ridiculously quiet! Stupidly so! That’s servo motors for you. Darren

If there was a spindle lock somewhere on box Top work Boo! The shaft lock is a tricky one, not impossible, but very far from simple and the opposite of cheap! As soon as I start trying to customise s...

who's still using Nitro-Cellulose for their finishing Or Shou sugi ban primer as it's also known!! 🤣

Hi @koendb, I'm probably still a few steps away from being able to offer them for sale and I need to get the cost of the parts down, specifically the motor system and the shaft, if they are going to s...

Shou sugi ban finish Hmmmmm, a small oxy-acetylene powered flame thrower for the amateur guitar maker market....now there's a thought! What could possibly go wrong! 🤣 🤣 🤣

I may not get around to doing everything today Hi @boo, If you get an E06 error on the display when you turn it on its because the 'throttle lever' isn't set to 'off'. Just push it all the way down a...

I'm just thinking that it's going to be a lot easier to store without that inserted. Hi @jonhodgson, It stands vertically on it's back end quite happily so leaving the shaft in position isn't too m...

some failure..BOO!!! That's a bit harsh! He's trying his best! 🤣 🤣

Hi Erik, I am not sure I entirely understand your dimensions. Are you saying that with the neck on the bridge to nut measurement is 2" more than it should be? I really doubt that all is lost! The impo...

I like that flat spot on the bottom of the body Design dictated by the running out of guitar stands! I like it! Actually it does look cool and Maccaferris stand up beautifully on their own so you are...