Not cheap, but a very stable even pressure applied with these Axminster clamps Attachment : 20210413_142603.jpg

Not a typical finish, but I wanted to maintain the patena on this Honduran Mahogany Driftwood top - so three coats of Danish Oil was all it needed. Just going through Set-Up prior to video & shipp...

@tv1 These blue dots are clear acrylic rods (cheaper than chips!) With blue acrylic paint in hole (needed to hide brad point depression) Attachment : 20210406_125233.jpg and on base and sides o...

@tv1 Probably acrylic - you can use clear and paint the underside any colour you like prior to gluing and it comes out fine. Bought some ebony for fretboard, but it's started cupping (sold as 8% con...

Provisional fret marker design front & sides Attachment : 20210405_192754.jpg

External routing guides finished Attachment : 20210404_200134.jpg Do you guys use pre-made guide for Neck pocket or use straight edges and stops?

RE Set Neck build: Waiting for Ebony fretboard blanks and advice on using 1" Neck blank. Meanwhile - I'm chuffed with progress on semi-hollow Telecaster style geetah. Applied the mahogany back today. ...

For anything showing wood grain I use acrylic clear supplied by the Paint Centre Newton Abbott - the rattle cans have amazing quality adjustable nozzles. Prior to spraying I brush seal grain first. ...

@darrenking I'm going to be needing some of your funky looking ply soon. Do you do 6mm sheets for applied tops?

@Boo Stage 1 complete Attachment : 20210328_002531.jpg

Meanwhile -: A Seaside theme for the semi-hollow Telecaster. The less porous wood gets sanded back to natural, then colours re- Attachment : 20210327_162625.jpg applied Hopefully it will go fr...

Do what you need to do @markbailey People first! Warmth & respect

I'm waiting for someone to make minature bearing cutter for dremel as the issue is the same. Multiple sessions applying pressure with rotating shaft ain't gonna do much good.

@mattbeels Smallest bearing cutter is too large & I'm not comfortable with letting the shaft of the cutter run on template edge. Attachment : 20210324_100337.jpg

Someone mentioned Telecaster at the top of this thread Attachment : 20210324_020716.jpg I've spent decades training woodworm Attachment : 20210324_020739.jpg What's your preferred me...

Jet double cutaway. Standard Jet pattern will work - just flip template for top horn. Some are made semi-hollow, others slab with profiled top. It's the shape I want for my Walnut build

Can I butt in on this supremely tasteful post and ask if anyone knows of a set of router templates for a Gretsh Malcolm Young Jet guitar? Really struggling to locate some

I placed some Cobola next to the body and it looks too busy to my eye - I'm thinking ebony fretboard would let the body shine? Meanwhile the Bookmatch fever continues Attachment : 20210322_165543....

Some-awe!!! You have to do the three neck! Body access/Neck pockets to mimic three legs

When Ronnie Wood was good and Live takes in the studio allowed things to be rough around the edges, but very real. More nostalgia than merit