Sorry I missed out the guide coat picture. Spray this on before flatting (sanding) the primer. It’s only a light coat and it will all get sanded off anyway. Attachment : 3E9E6304-1D0B-4110-86E2-F...

Once you know how to do it, it’s easy, you can apply the same principle to whatever you are painting. Prep Prime (spray) Flat sand Paint colours (spray) Clear coat (lacquer) Flat sand up to and incl...

@darrenking There is a special prize for anyone who comes up with a new mistake but it is highly unlikely anybody ever wins it! I can't believe that anyone else has drilled the bottom horn for the s...

@clinton I have signed up ...this is going to be great!

@tv101 Cheapskate! I bought the old skool courses too but have just levelled up to Premium on account of the bolt on neck, pending finishing and acoustic bridge courses ..... but I forget....... you'r...

Now, I'm *not* a premium member (as yet) because I got the course from years back when Mark first put them online (different platform). Which is one of the reasons that I've been really looking forwar...

Unmask and then clear coat the lot. Attachment : 80887D47-D28E-47DC-9077-0B53A22383E7.jpeg Attachment : 489078F1-9F66-471A-AC0E-76B5D49A3918.jpeg

If Blackpool's further north than Exeter then it's too cold for me 🥶 Nothing wrong with seedy pubs though 😉

Hi All, I am new here and never built a electric guitar before. I am building a guitar for my thesis for school and Mark helped me a lot along the way! Today i cut out of the shape of my guitarbody (i...

Here is your invitation to the workshop livestream - bring yer best Q's!

I'd say ... Use the body plans that best match the moulds you've already built. I think we're looking to learn the techniques of guitar building, and, in this case, the techniques of building a guitar...

Hi all, if anyone is after a LARGE quality vice, Axminstertoolsoutlet on Ebay are selling "Axminster Trade Vices Quick Release Carpenter's Vices - 225mm (9") " for £54.96 rather than £99.88 free P&...

The cost of Premium Membership is the cheap bit.........

Not sure who is closest to me. I’m in Letchworth, Herts. More than happy to share my tea, coffee and facilities, big belt sander, vertical panel saw, veneer saw, vacuum presses etc with any members wh...

I thought today's Carol & Mark show was a cracker. Live content and production was top notch. Loads of Pennies and Daves dropped ...... and as the old proverb goes.... when the student is ready a...

@peebee Turned out really nice. Surprised at the potentials Mark unleashes following his online courses. Truly is the best.

Hi Ok, I use tone monster harness that has the same principle of solderless wiring system. Keep in mind pick ups have different color coding based on the manafacturer. The yellow and red terminal ...

@peebee I’ll have a think about it. Could be a very low cost CNC project. Regards Darren

I made this a while ago @robin it works well and I agree with @darrenking that so long as the radius is slightly more acute than the fretboard, you don’t need to know the an exact radius. I just used ...

Ha hey! Another victim to the addiction 🤣 There's no going back now..... you can check out but you can never leave 😉